Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

40-Gigabit Ethernet PIC with CFP (T4000 Router)

 

Software Release

Junos OS Release 13.2

For information on which FPCs support this PIC, see T4000 PIC/FPC Compatibility.

Hardware Features

  • One 40-Gigabit Ethernet port

  • Power requirement: 1.46 A @ –48 V (70.0 W)

  • Model number: PD-1XLE-CFP

  • Maximum transmission units (MTUs) up to 9192 bytes

Software Features

Table 1: Software Features Supported

Software Feature

T4000 First Supported Junos OS Release

Media Access Control (MAC) accounting

Note: MAC accounting on this PIC is not supported when aggregated Ethernet is configured.

13.2R1

Source and destination MAC address filtering

13.2R1

Ethernet OAM 802.3ah (remote loopback is not supported for this PIC)

13.2R1

Layer 2 filtering and accounting based on Layer 2 headers

13.2R1

Multiple tag protocol identifiers (TPIDs) used for filtering and counting

13.2R1

Flexible virtual LAN (VLAN) tagging

13.2R1

Channels defined by two stacked VLAN tags

13.2R1

Layer 2 protocols:

  • Flexible Ethernet service

  • Ethernet circuit cross-connect (CCC)

  • Ethernet translational cross-connect (TCC)

  • Ethernet virtual private LAN service (VPLS)

  • VLAN CCC

  • Extended VLAN TCC

  • VLAN VPLS

13.2R1

Layer 3 protocols:

  • IPV4

  • IPV6

  • MPLS

13.2R1

Optical control features (vendor dependent)

13.2R1

IEEE 802.3ad Link Aggregation

13.2R1

Graceful Routing Engine switchover (GRES)

13.2R1

Cables and Connectors

  • Duplex SC/PC connector (RX and TX)

  • 40-Gigabit Ethernet CFP transceiver: 40GBASE-LR4 (model number: CFP-40GBASE-LR4)

  • Optical interface specifications—see the Hardware Compatibility Tool at https://apps.juniper.net/hct/

LEDs

Table 2: 40-Gigabit Ethernet PIC with CFP LEDs

Label

Color

State

Description

STATUS

Off

PIC is not enabled.

Green

On steadily

Online with no alarms or failures.

Yellow

On steadily

PIC is initializing.

Red

On steadily

PIC has a remote or local fault.

Port LED Rx

Off

Port might be on, but there is a local or remote fault.

Green

On steadily

Port is receiving data.

Port LED Tx

Off

Port might be on, but there is a local fault.

Green

On steadily

Port is transmitting data.

Alarms, Errors, and Events

  • Alarm indication signal (AIS)

  • Laser bias current high/low alarms and warnings

  • Laser Rx power high/low alarms and warnings

  • Module not ready alarm

  • Module power down alarm

  • Module temperature high/low alarms and warnings

  • Rx CDR loss of lock alarm

  • Rx loss of signal alarm

  • Rx not ready alarm

  • Tx CDR loss of lock alarm

  • Tx data not ready alarm

  • Tx laser fault alarm

  • Tx not ready alarm