SONET/SDH OC12c/STM4 EOL PICs (T1600 Router)

Software release

• Junos OS Release 8.5

• Junos OS Release 9.4 and later supports the PB-1OC12-SON-MM PIC on the Enhanced Scaling FPC1 (T640-FPC1-ES).

Hardware features

• Multiplexing and demultiplexing

• Rate policing on input

• Rate shaping on output

• Packet buffering, Layer 2 parsing

Cables and connectors

• Duplex SC/PC connector (Rx and Tx)

• SONET/SDH OC12/STM4 fixed transceivers:

  • 1-port and 4-port: Multimode

  • 4-port: Single-mode Intermediate reach (IR-1)

  Optical interface specifications—see SONET/SDH OC12/STM4 Optical Interface Specifications

Note: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device. For information about taking a PIC offline, see the request chassis pic offline command in the CLI Explorer.

Alarms, errors, and events

• SONET alarms:

  • Alarm indication signal—line (AIS-L)

  • Alarm indication signal—path (AIS-P)

  • Bit error rate signal degrade (BERR-SD)

  • Bit error rate signal fail (BERR-SF)

  • Bit interleaved parity (BIP) error B1

  • Bit interleaved parity (BIP) error B2

  • Bit interleaved parity (BIP) error B3

  • Loss of frame (LOF)

  • Loss of pointer (LOP-P)

  • Loss of signal (LOS)

  • Far-end bit error: remote error indication—line (REI-L) (CV-LFE)

  • Far-end bit error: remote error indication—path (REI-P) (CV-PFE)

  • Payload mismatch (path label mismatch) (PLM-P)

  • Payload unequipped (unequipped STS at path level) (UNEQ-P)

  • Remote defect indication—line (RDI-L)

  • Remote defect indication—path (RDI-P)

• SDH alarms:

  • Multiplex section alarm indication signal (MS-AIS)

  • Administrative unit alarm indication signal (AU-AIS)

  • Bit error rate signal degrade (BERR-SD)

  • Bit error rate signal fail (BERR-SF)

  • Bit interleaved parity (BIP) error B1

  • Bit interleaved parity (BIP) error B2

  • Bit interleaved parity (BIP) error B3

  • Loss of frame (LOF)

  • Loss of pointer (HP-LOP)

  • Loss of signal (LOS)

  • Multiplex section remote error indication (MS-REI)

  • Higher path label mismatch (HP-PLM)

  • Higher path unequipped (HP-UNEQ)

  • Multiplex section remote defect indication (MS-RDI)

  • Higher path remote defect indication (HP-RDI)

• Errored seconds (ES-S, ES-L, ES-P), far-end errored seconds (ES-LFE, ES-PFE), far-end severely errored seconds (SES-LFE, SES-PFE), far-end unavailable seconds (UAS-LFE, UAS-PFE)

• Severely errored framing (SEF), severely errored framing seconds (SEFS-S), severely errored seconds (SES-S, SES-L, SES-P), unavailable seconds (UAS-L, UAS-P)