Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

10-Gigabit Ethernet PIC with SFP+ (PTX Series)

 

Software Release

  • PTX3000: Junos OS Release 13.2R2 and later

  • PTX5000: Junos OS Release 12.1X48 and later, Junos OS Release 12.3R1 and later, and Junos OS Release 13.2R1 and later

    Note

    PTX5000 does not support Junos OS Releases 12.1, 12.2, or 13.1.

For information about which FPCs support these PICs, see PTX Series PIC/FPC Compatibility.

Hardware Features

  • Twenty-four 10-Gigabit Ethernet SFP+ ports

  • Model number: P1-PTX-24-10GE-SFPP

  • Name in the CLI: 24x 10GE (LAN) SFP+

  • Power requirements: 1.45 A @ –48 V (70 W)

  • High-performance throughput: LAN-PHY mode at 10.3 Gbps

  • Full-duplex mode

  • Large maximum transmission units (MTUs):

    • Junos OS Release 12.1X48: up to 9192 bytes

    • Junos OS Release 12.1X48R2 and later 12.1X48 releases: up to 9500 bytes

    • Junos OS Release 12.3R1 and later: up to 9500 bytes

Software Features

Table 1 shows the first supported Junos OS release for each software feature.

Table 1: Software Features Supported

Software Feature

PTX3000 First Supported Junos OS Release

PTX5000 First Supported Junos OS Release

Dual-rate speed (all ports are configured for 1 Gbps or 10 Gbps, no mixed-mode speed)

13.3R3

14.1R3

14.2R2

15.1R1

14.2R2

15.1R1

Flexible-ethernet-services encapsulation

13.2R2

12.1X48

12.3R1

13.2R1

Flexible VLAN tagging

13.2R2

12.1X48

12.3R1

13.2R1

IFINFO / IFMON

13.2R2

12.1X48

12.3R1

13.2R1

IEEE 802.1 ag OAM

13.2R2

12.1X48

12.3R1

13.2R1

IEEE 802.3 ah OAM

13.2R2

12.1X48

12.3R1

13.2R1

IEEE 802.3ad link aggregation

13.2R2

12.1X48

12.3R1

13.2R1

Interrupt-driven link-down detection for MPLS FRR

13.2R2

12.1X48

12.3R1

13.2R1

MAC accounting per logical interface for source addresses

13.2R2

12.1X48

12.3R1

13.2R1

MAC filter per port for destination addresses and source addresses

13.2R2

12.1X48

12.3R1

13.2R1

MAC filter per logical interface for source addresses

13.2R2

12.1X48

12.3R1

13.2R1

SNMP

13.2R2

12.1X48

12.3R1

13.2R1

Up to 8000 logical interfaces shared across all ports on a single Packet Forwarding Engine

13.2R2

12.1X48

12.3R1

13.2R1

Cables and Connectors

Tip

You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.

This PIC supports the following transceivers:

  • 10GBASE-ER (model number: SFPP-10GE-ER)

  • 10GBASE-LR (model number: SFPP-10GE-LR)

  • 10GBASE-SR (model number: SFPP-10GE-SR)

  • 10GBASE-ZR (model number: SFPP-10GE-ZR) supported in Junos OS Release 12.3 and later

  • 10GBASE-ZR (model number: SFPP-10G-OTN-XT)

    • Supported in Junos OS Release 12.3R5, 13.2R3, and 13.3R1, and later

    • NEBS compliant

    • Dual-rate extended temperature transceiver that supports LAN-PHY and WAN-PHY modes, and OTN rates

  • 10GBASE-ZR (model number: SFPP-10G-DT-ZRC2)

    • Supported in Junos OS Release 13.2R5, 13.3R3, 14.1R2, and 14.2R1, and later

    • Supports LAN-PHY and WAN-PHY modes

    • Supports OTN rates of 10.70932 Gbps (OTU2) and 11.0957 Gbps (OTU2e)

    • Tunable by configuring the wavelength statement at the [edit interfaces interface-name optics-options] hierarchy level (see wavelength)

    • NEBS compliant

  • 1000BASE-LX (model number: SFP-1GE-LX) supported in Junos OS Release 13.3R3, 14.1R3, 14.2R2, and 15.1R1, and later

  • 1000BASE-SX (model number: SFP-1GE-SX) supported in Junos OS Release 13.3R3, 14.1R3, 14.2R2, and 15.1R1, and later

LEDs

The STATUS LED is located above the ONLINE OFFLINE button. The LINK and ACT LEDs are located next to each port. The LINK and ACT label is located at the bottom of the PIC.Table 2 describes the functions of these LEDs.

Table 2: 10-Gigabit Ethernet PIC with SFP+ LEDs

Label

Color

State

Description

STATUS

Green

On steadily

PIC is operating normally.

Yellow

On steadily

PIC is initializing.

Red

On steadily

PIC has an error or failure.

Off

PIC is offline and safe to remove from the router.

LINK (for each port)

Green

On steadily

Port is on with no alarms or errors.

Red

On steadily

Port has detected an alarm or error.

Off

Port is off.

ACT (for each port)

Green

Flashing

Link has activity.

Off

No activity.