M40e PIC Components
Most PICs supported on the M40e Multiservice Edge Router have the following components. For complete specifications, see the M40e Multiservice Edge Router PIC Guide. For information about pinouts for PIC cable connectors, see RJ-45 Connector Pinouts for the M40e Routing Engine MGMT Port.
- One or more cable connector ports—Accept a network media connector.
- LEDs—Indicate PIC and port status. Most PICs have an LED labeled STATUS on the PIC faceplate. Some PICs have additional LEDs, often one per port. The meaning of the LED states differs for various PICs. For more information, see the M40e Multiservice Edge Router PIC Guide.
- Offline button—Prepares the PIC for removal from the FPC when pressed. For the PICs that install on an Type 1 FPCs, the offline button for each PIC is next to it on the FPC card carrier. For the PICs that install on an Type 2 FPCs, the offline button is on the PIC faceplate.
