Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Multiservices PICs (M120 Router)

 
Figure 1: Multiservices 100 PIC
Multiservices 100 PIC
Figure 2: Multiservices 400 PIC
Multiservices 400 PIC
Figure 3: Multiservices 500 PIC
Multiservices 500 PIC

Software release

  • Multiservices 100: Junos OS Release 8.2R2 and later (Type 1)

    Note: This PIC requires the 710-017980 version of the FPC1.

  • Multiservices 400: Junos OS Release 8.2 and later (Type 2)

  • Multiservices 500: Junos OS Release 8.3 and later (Type 3)

For information on which FPCs support these PICs, seeM120 PIC/FPC Compatibility .

Description

  • Supports tunnel services. This feature is included with the PIC and does not require an individual license.

  • Individual licenses must be purchased for additional services.

  • Power requirement:

    • Type 1: 0.52 A @ 48 V (25 W)

    • Type 2: 0.69 A @ 48 V (33 W)

    • Type 3: 0.83 A @ 48 V (40 W)

Hardware features

  • Active monitoring on:

    • Type 1: up to 1.6 million flows

    • Type 2: up to 3.2 million flows

    • Type 3: up to 3.2 million flows

Software features

  • Support for up to 2000 service sets

  • Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces

Depending on your Junos OS Release and individual licenses, software features for this PIC can include the features listed in Table 1. For more information about the software features available for services PICs, see the Junos OS Services Interfaces Library for Routing Devices.

LEDs

Status LED, one tricolor:

  • Off—PIC is offline and it is safe to remove it from the chassis.

  • Green—PIC is operating normally.

  • Yellow—PIC is initializing.

  • Red—PIC has an error or failure and no further harm can be done by removing it from the chassis.

Application LED, one bicolor:

  • Off—Service is not running.

  • Green—Service is running under acceptable load.

  • Yellow—Service is overloaded.

Table 1: Multiservices PICs Software Features Supported on the M120 Router

Software Feature

Multiservices 100

Multiservices 400

Multiservices 500

GRE Key

–

–

–

GRE dont-fragment

–

–

–

Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks

8.2R2

8.2

8.3

Network Address Translation (NAT) for IP addresses

8.2R2

8.2

8.3

Port Address Translation (PAT) for port numbers

8.2R2

8.2

8.3

IP Security (IPSec) encryption

8.2R2

8.2

8.5

Active flow monitoring exports cflowd version 5 and version 8 records

8.2R2

8.2

8.3

Active flow monitoring exports flow monitoring version 9 records, based on RFC 3954

8.3

8.3

8.5

Passive flow monitoring

–

8.4

–

Passive flow collection

–

8.5

–

Flow-tap

8.2R2

8.2

8.5

Dynamic flow capture

–

8.4

–

Real-time Performance Monitoring

8.2R2

8.2

8.5

Link services

8.2R2

8.2

8.5

Tunnel services:

  • IP-IP unicast tunneling

  • GRE unicast tunneling—Supports GRE fragmentation

  • Protocol Independent Multicast (PIM) sparse mode unicast tunneling

8.2R2

8.2

8.3

Virtual tunnel interface for Layer 3 VPNs

8.2R2

8.2

8.3

Layer 2 Tunneling Protocol (L2TP)

8.2R2

8.2

8.3

Voice services:

  • Compressed Real-Time Transport Protocol (CRTP)

8.2R2

8.2

8.5

Encapsulations:

  • Multilink Frame Relay (MLFR)

  • Multilink Point-to-Point Protocol (MLPP)

8.2R2

8.2

8.3

Related Documentation