Protocols and Applications Supported by the MPC10E

Table 1 contains protocols and applications supported by the MPC10E line cards (MPC10E-15C-MRATE and MPC10E-10C-MRATE) on the MX240, MX480, and MX960 routers.

A dash indicates that the protocol or application is not supported.

Table 1: Protocols and Applications Supported by MPC10E line cards in the MX240, MX480, and MX960 Routers

Protocol or Application	First Supported Junos OS Release for MPC10E-15C-MRATE	First Supported Junos OS Release for MPC10E-10C-MRATE
Access Node Control Protocol (ANCP)	-	-
Accepts traffic destined for generic routing encapsulation (GRE) tunnels Dynamic Standard	Release 19.3R1 19.1R1	Release - 19.2R1
Accepts traffic destined for Distance Vector Multicast Routing Protocol (DVMRP) (IP-in-IP) tunnels Dynamic Standard	-	-
Bidirectional Forwarding Detection protocol (BFD) Centralized BFD Distributed BFD Inline BFD (single-hop only) Single-hop BFD Multihop BFD Micro BFD BFD over Integrated routing and bridging (IRB) interfaces BFD over Pseudowire over LT and RLT interfaces Virtual circuit connectivity verification (VCCV) BFD for Layer2 VPNs and Layer2 circuits VCCV BFD for VPLS BFD authentication Seamless BFD	Release 19.1R1 19.1R1S1 19.1R1S1 19.1R1S1 19.1R1S1 19.3R1 19.3R1 19.3R1 19.3R1 - - -	Release 19.2R1 19.2R1 19.2R1 19.2R1 19.2R1 19.3R1 19.3R1 19.3R1 19.3R1 - - -
Internet Control Message Protocol (ICMP) and ICMPv6	19.1R1	19.2R1
Border Gateway Protocol (BGP)	19.1R1	19.2R1
Bridge protocol data units (BPDUs)	-	-
BGP/MPLS virtual private networks (VPNs)	19.1R1	19.2R1
Routing Instance: Logical system Virtual routing and forwarding (VRF)	19.1R1	19.2R1
Load Balancing	19.1R1	19.2R1

Class of service (CoS)	First Supported Junos OS Release for MPC10E-15C-MRATE	First Supported Junos OS Release for MPC10E-10C-MRATE
Maintain CoS across internal tunnel interfaces	19.1R1	19.2R1
Packet Rewrites on DSCP, Inet Precedence (both Ipv4 and IPv6) and EXP bits	19.1R1	19.2R1
Behavior aggregate (BA) classification (except IEEE classifiers)	19.1R1	19.2R1
BA classification based on 802.1p of payload for core-facing VPLS interfaces	-	-
BA DSCP classification of MPLS packets for L3VPN and MPLS interfaces	19.1R1	19.2R1
BA DSCP classification of MPLS packets for VPLS LSI interfaces	-	-
BA DSCP classification for VPLS/CCC family	19.4R1	19.4R1
Rate limit option for per-port queues	19.1R1	19.2R1
Queue depth monitoring	19.3R1	19.3R1
Configurable .1p inheritance: push and swap from the hidden tag	-	-
Configurable shaping overhead for scheduling	19.1R1	19.2R1
Class of service (CoS) per port: Eight queues per port Excess-rate and excess-priority configurations at the queue level Shaping at the port level Shaping at the queue level Scheduling of queues based on the weighted round-robin (WRR) per excess-priority class Round-robin scheduling of the queues per priority class Weighted random early detection (WRED)	19.1R1	19.2R1
Class of service (CoS) per virtual LAN (VLAN): Accounting, filtering, and policing IEEE 802.1p rewrite IEEE 802.1p classification	Release 19.1R1 - -	Release 19.2R1 - -
Class of service (CoS) per Point-to-Point Protocol over Ethernet (PPPoE) or Dynamic Host Configuration Protocol (DHCP) subscriber interfaces: Accounting, filtering, and policing IEEE 802.1p rewrite Classification Excess-rate and excess-priority configuration at the queue level Shaping at the queue level Scheduling of queues based on weighted round-robin (WRR) per priority class Weighted random early detection (WRED)	Release - - - - - - -	Release - - - - - - -
Ingress and egress hierarchical class-of-service (CoS) shaping and hierarchical-scheduler: Note: Only egress is supported. Group of virtual LANs (VLANs) level VLAN level Port level	-	-
Distributed Denial-of-Service (DDoS) Protection	19.1R1	19.2R1
DVMRP and GRE support—access side and server side	-	-
Managing Power	19.1R1	19.2R1
Ethernet Ring Protection Switching with multiple G.8032 instances	-	-
Flexible Queuing Mode	-	-
IEEE 802.1ag Ethernet OAM Continuity Check protocol	-	-
IEEE 802.1ag Ethernet OAM Linktrace protocol	-	-
IEEE 802.1ag Ethernet OAM Loopback protocol	-	-
IEEE 802.1ag: Maintenance association intermediate point (MIP) Continuity check message (CCM) Stacked VLAN tagging Trunk ports VPLS VPWS VLAN circuit cross-connect (CCC) encapsulation and Translational cross-connect (TCC) encapsulation	Release - - 19.1R1 - - 19.1R1 19.1R1 -	Release - - 19.2R1 - - 19.2R1 19.2R1 -
IEEE 802.1ag optional type, length, and value (TLVs) support Configuring Port Status TLV and Interface Status TLV	19.1R1	19.2R1
IEEE 802.3ah distributed periodic packet management (PPM) process, alarm indication signal (AIS), and remote defect indication (RDI)	19.1R1	19.2R1

Family Inet/Inet6/MPLS	19.1R1	19.2R1
All the static match conditions/actions	19.1R1	19.2R1
Dynamic actions (port-mirroring, next hop, routing instance)	19.1R1	19.2R1
Interface-specific filters	19.1R1	19.2R1
BGP Flow specification	19.1R1	19.2R1
Two color and three color policers (SRTCM and TRTCM)	19.1R1	19.2R1
FTF (filter attachment on routing table)	19.1R1	19.2R1
Firewall attachment on Aggregated Ethernet Interfaces (AE)	19.1R1	19.2R1
Hierarchical Policers	19.4R1	19.4R1
Family Any/CCC (for firewall)	19.2R1	19.2R1
Percentage Bandwidth policers, Shared Bandwidth policers, Logical Interface policers	19.4R1	19.4R1
Physical interface policers	19.4R1	19.4R1
Firewall Based GRE ENCAP/DECAP	19.2R1	19.2R1
Fast lookup filter	19.2R1	19.2R1
Jvision (firewall filter counters only)	19.2R1	19.2R1
Filter-based tunneling: GRE-in-UDP encapsulation and decapsulation MPLS-over-UDP decapsulation	19.3R1	19.3R1
Filter-based forwarding: Next-IP Next-interface	19.3R1	19.3R1
Interface-group	19.3R1	19.3R1
Family bridge filter	19.3R1	19.3R1
VPLS family filter	19.3R1	19.3R1
Filter attachment on IRB, Pseudowire over LT and RLT interfaces, and bridge-domain	19.3R1	19.3R1
Flexible Ethernet encapsulation	19.1R1	19.2R1
Graceful Routing Engine Switchover (GRES)	19.1R1	19.2R1
IGMPv3 support with snooping disabled	19.1R1	19.2R1
Intelligent Oversubscription on MIC and MPC Interfaces Overview	19.1R1	19.2R1
Integrated routing and bridging (IRB)	-	-
Unified In-service software upgrade (Unified ISSU)	-	-
Interoperability with MPCs	19.1R1	19.2R1
Interoperability with MS-DPCs/MS-MPCs	-	-
Interoperability with MX Series Flexible PIC Concentrators (MX-FPC)	-	-
IPv4	19.1R1	19.2R1
IPv4 multicast PIM sparse mode (PIM-SM) PIM source-specific multicast (PIM-SSM) Point to multipoint (P2MP) Multicast-only fast reroute (MoFRR) Draft-rosen MVPN	Release 19.1R1 19.1R1 19.3R1 19.3R1 19.3R1	Release 19.2R1 19.2R1 19.3R1 19.3R1 19.3R1
IPv6	19.1R1	19.2R1
IPv6 MLD	19.1R1	19.2R1
IPv6 multicast PIM sparse mode (PIM-SM) PIM source-specific multicast (PIM-SSM) Point to multipoint (P2MP) Multicast-only fast reroute (MoFRR) Draft-rosen MVPN	Release 19.1R1 19.1R1 19.3R1 19.3R1 19.3R1	Release 19.2R1 19.2R1 19.3R1 19.3R1 19.3R1
IPv6 Neighbor Discovery	19.1R1	19.2R1
IS-IS	19.1R1	19.2R1
ITU-T Y.1731 timestamping support on MX Series routers	-	-

Switching of pseudowire segments (multisegment pseudowires with BGP-L2VPN)	19.1R1	19.2R1
LDP signaling for VPLS (LDP-VPLS) and MAC flush message processing (MAC-FLUSH-TLV)	-	-
RSVP graceful restart interoperability with Cisco using Nodal Hello	-	-
Failure action on BFD session down of RSVP LSPs	19.3R1	19.3R1
OSPF and IS-IS loop-free alternates (LFA)	19.1R1	19.2R1
4/5 label MPLS operation	19.1R1	19.2R1
Virtual circuit connectivity verification (VCCV) BFD	19.3R1	19.3R1
Point to multipoint using the enhanced-ip command (support for NG-MVPN and P2MP load balancing over aggregated Ethernet)	19.4R1	-
MPLS-FRR bypass link protection	19.1R1	19.2R1
Load sharing across 64 ECMP next hops	19.1R1	19.2R1
MPLS-FRR VPLS instance prioritization	-	-
Five label stack on ingress	19.1R1	19.2R1
MPLS node protection, link protection, and statistics for static LSPs	19.1R1	19.2R1
mvrp	-	-
Multitopology routing	-	-
Nonstop active routing (NSR)	19.1R1	19.2R1
OSPF	19.1R1	19.2R1
Packet mirroring	19.1R1	19.2R1
Precision Time Protocol (PTP) (IEEE 1588)	19.1R1	19.2R1
IEEE 802.1ah provider backbone bridging (PBB)	-	-
Push a tag on Ethernet VPLS and Ethernet CCC tag encapsulations	-	-
RSVP Overview	19.1R1	19.2R1
RIP	19.1R1	19.2R1
SNMP	19.1R1	19.2R1
Spanning Tree Protocols: IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) (part of IEEE 802.1Q VLANs) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1D Spanning Tree Protocol (STP) Per-VLAN Spanning Tree (PVST) Bridge protocol data units (BPDUs) guard and loop guard STP inter-protocol action profiles and MAC flush (in VPLS multi-homing, flush all MACs when there is a change in the STP interface state due to root protect)	-	-
Subscriber Management and Services: Enhanced subscriber management—Uplink communications to the core network only	19.3R1	19.3R1
Synchronous Ethernet	19.2R1	19.2R1
Two-Way Active Measurement Protocol (TWAMP)	19.2R1	19.2R1
Tunnel services Clear DF-Bit (Don't Fragment Bit)	19.3R1	19.3R1
Unified in-service software upgrade (ISSU)	-	-
Unnumbered Ethernet Interface	19.3R1	19.3R1
VLANs IEEE 802.1Q: VLAN stacking and rewriting Flexible VLAN tagging Single VLAN tags Dual VLAN tags IP service for nonstandard TPID and stacked VLAN tags	19.1R1	19.2R1
Virtual Chassis: MPLS IPv4 and IPv6, unicast, multicast forwarding, VPLS, NSR for Layer 3/MPLS services	-	-
Virtual private LAN service (VPLS): BGP multihoming for inter-AS VPLS Gigabit Ethernet as core-facing interface Configurable label block sizes Hashing L3/L4 fields under Ethernet pseudowire for VPLS encapsulation, CCC encapsulation, and MPLS encapsulation VPLS flood forwarding table filter (FTF), input FTF Broadcast, unicast unknown, and multicast (BUM) traffic hashing over LAG	-	-
Virtual private network (VPN)	19.1R1	19.2R1
Support for the following features in hyper-mode: Configuring ICMP redirects and generating ICMP redirect messages. Padding VLAN packets to a minimum frame size of 68 bytes, by using the existing command set interfaces interface-name gigether-options pad-to-minimum-frame-size. Collecting interface family statistics for IPv4andIPv6, by using the existing command show interfaces statistics detail interface-name.	19.2R1	19.2R1
Virtual Router Redundancy Protocol (VRRP) for IPv4	19.3R2	19.3R2
VPLS packet flooding to the right set of interfaces across mesh groups	-	-
WAN-PHY mode	19.1R1	19.2R1

Flow monitoring and services	First Supported Junos OS Release for MPC10E-15C-MRATE	First Supported Junos OS Release for MPC10E-10C-MRATE
Inline IP Flow Information Export (IPFIX)	19.1R1	19.2R1
Inline flow monitoring for MPLS, MPLS-IPv4 and MPLS-IPv6 traffic (IPFIX and V9 formats)	19.3R1	19.3R1
Inline flow monitoring for IPv4 or IPv6 traffic on next-hop based GRE Tunnels and ps interfaces	19.3R1	19.3R1
Port mirroring for family bridge CCC encapsulation	19.3R1	19.3R1
Port mirroring for VPLS	19.4R1	19.4R1
Packet slice for port mirroring	-	-
Labeled-switched-paths (LSPs) including accounting, policers, and filtering	19.1R1	19.2R1
Minimum LDP Configuration	19.1R1	19.2R1

MACSec	First Supported Junos OS Release for MPC10E-15C-MRATE	First Supported Junos OS Release for MPC10E-10C-MRATE
GCM-AES-128 MACSec Encryption, 802.1AE-2006	19.1R1	19.2R1
GCM-AES-256 MACSec Encryption, 802.1AEbn-2011	19.1R1	19.2R1
Mobile IP	-	-
Multichassis link aggregation	-	-
Multiple Tag Protocol Identifiers (TPIDs)	19.1R1	19.2R1

Layer 2 Features	First Supported Junos OS Release for MPC10E-15C-MRATE	First Supported Junos OS Release for MPC10E-10C-MRATE
Trunk ports	19.2R1	19.2R1
Layer 2 support for MX Series Virtual Chassis	19.2R1	19.2R1
Layer 2 and Layer 2.5, IRB and Spanning Tree Protocols (xSTP)	19.3R1	19.3R1
IEEE 802.1ad provider bridges	19.3R1	19.3R1
L2TP silent failover and peer interface	19.3R1	19.3R1
Multichassis LAG—active/active and active/standby	-	-
Multichassis LAG—active/active with IGMP snooping	-	-
Link aggregation group (LAG)—VLAN-CCC encapsulation	19.3R1	19.3R1
IGMP snooping with bridging, IRB, and VPLS	19.3R1	19.3R1
Layer 2 VPN interfaces support VLAN ID list	19.3R1	19.3R1
Link aggregation (IEEE 802.3ad)	19.3R1	19.3R1
Link Aggregation Control Protocol (LACP)	19.2R1	19.2R1
Link Layer Discovery Protocol (LLDP)	19.3R1	19.3R1
Local loopback	19.3R1	19.3R1
MAC learning, policing, accounting, and filtering	19.3R1	19.3R1

MPLS	Features supported in Junos OS Release for MPC10E-15C-MRATE	Features supported in Junos OS Release for MPC10E-10C-MRATE
End-to-end LSP MPLS ping	20.2R1	20.2R1
LDP pseudowire auto-sensing	20.2R1	20.2R1
LSP ping for circuit cross-connect (CCC) and CCC secondary standby LSP	20.2R1	20.2R1
Edge node failure protection of LDP-signaled pseudowire	20.2R1	20.2R1
Link and node protection for static LSPs	20.2R1	20.2R1
Support of statistics for static LSPs	20.2R1	20.2R1
Stitching of pseudowire segments (multisegment pseudowires with BGP Layer 2 VPN)	20.2R1	20.2R1
Cross-connect logical interface to two unsignaled virtual circuits terminating on different egress Provider Edge (PE) devices	20.2R1	20.2R1
Generic Associated Channel Label (GAL) and Generic Associated Channel Header (G-Ach) and application to BFD or LSP ping	20.2R1	20.2R1
OSPF loop-free alternates (LFA)	20.2R1	20.2R1
Ultimate hop popping (UHP) support for LSPs	20.2R1	20.2R1
GMPLS co-routed packet LSPs	20.2R1	20.2R1
LDP downstream-on-demand	20.2R1	20.2R1
Seamless Multicast MPLS: intSegmented P2P and P2MP LSPs with MVPN interworking	20.2R1	20.2R1
PS Interface support for PW Redundancy Condition	20.2R1	20.2R1

Protocols and Applications Supported by the MPC10E

Related Documentation