Syntax: xe-fpc/pic/port where:
For example, xe-1/3/3 is the interface for the last port (labeled
Cables and connectors
Tip: You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.
The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.
Note: The 16x10GE 3D MPC does not support WAN-PHY mode.
Note: SFPP-10G-CT50-ZR is not NEBS compliant when plugged into the MPC-3D-16XGE-SFPP. If the ambient air temperature exceeds 40 degrees C, Junos OS disables the transmitter, which takes the optical transceiver offline.
Enable/disable LED, one bicolor per port:
The enable/disable LEDs are labeled in groups of four: