MX10003 Multi-Rate Ethernet MIC

 
Figure 1: JNP-MIC
JNP-MIC
Figure 2: JNP-MIC1-MACSEC
JNP-MIC1-MACSEC

Software release

  • JNP-MIC1:

    Junos OS release 17.3R1 and later

  • JNP-MIC1-MACSEC:

    Junos OS release 17.3R2 and later

For information about which MPCs support this MIC, see MIC/MPC Compatibility. For information about which MICs are supported on MX Series routers, see MICs Supported by MX Series Routers.

Description

  • Weight: 3 lb (1.36 kg)

  • Model numbers:

    Without MACsec support: JNP-MIC1

    With MACsec support: JNP-MIC1-MACSEC

  • Power requirement:

    • JNP-MIC1:

      85 W at 55° C

      80 W at 25° C

    • JNP-MIC1-MACSEC:

      130 W at 55° C

      125 W at 25° C

  • Name in the CLI:

    JNP-MIC1: MIC1

    JNP-MIC1-MACSEC: MIC1-MACSEC

Hardware features

  • JNP-MIC1 and JNP-MIC1-MACSEC:

    • Twelve 100-Gigabit Ethernet ports that support quad small form-factor pluggable (QSFP28) transceivers

    • The ports are numbered 0 through 11.

    • Each port can be configured as a 100-Gigabit Ethernet port, 40-Gigabit Ethernet port, or as four 10-Gigabit Ethernet ports (by using a breakout cable).

    Table 1 lists the configurable Gigabit Ethernet port speeds for each port.

Software features

  • Supports rate selectability at the port level.

  • By default, the ports are configured as 10-Gigabit Ethernet ports.

  • Supports remote port identification.

  • JNP-MIC1-MACSEC supports Media Access Control Security.

Cables and connectors

Tip: You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.

The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.

LEDs

  • OK/FAIL LED, one bicolor:

    • OFF—MIC is offline or MIC has fault.

    • Red—MIC is in power failure state.

    • Green—MIC is online.

  • Link LED, one green per port:

    • Steady green—Link is up.

    • Off—Link is down or disabled.

  • Like port status LED, each individual lane LED support four states as: OFF, AMBER, GREEN, RED. See MPC and MIC Lane LED Scheme Overview for more details.

Table 1: Multi Rate Ethernet MIC Port Speed Capabilities for JNP-MIC1 and JNP-MIC1-MACSEC

Port #

4x10-Gigabit Ethernet

40-Gigabit Ethernet

100-Gigabit Ethernet

0

yes

yes

yes

1

yes

yes

yes

2

yes

yes

yes

3

yes

yes

yes

4

yes

yes

yes

5

yes

yes

yes

6

yes

yes

yes

7

yes

yes

yes

8

yes

yes

yes

9

yes

yes

yes

10

yes

yes

yes

11

yes

yes

yes