Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Multi-Rate Ethernet MACSEC MIC

 
Figure 1: MIC-MACSEC-MRATE
MIC-MACSEC-MRATE

Software release

Junos OS release 17.4R1 and later

For information about which MPCs support this MIC, see MIC/MPC Compatibility. For information about which MICs are supported on MX Series routers, see MICs Supported by MX Series Routers.

Description

  • Weight: 3 lb (1.36 kg)

  • Model number: MIC-MACSEC-MRATE

  • Power requirement:

    110 W at 45° C

    105 W at 25° C

  • Name in the CLI: MACSEC-12xQSFPP-XGE-XLGE-CGE

Hardware features

  • Twelve Gigabit Ethernet QSFP+ ports, each of which can be configured as a 40-Gigabit Ethernet port or as four 10-Gigabit Ethernet ports (by using a breakout cable).

  • The ports are numbered 0 through 11.

  • Eight out of the twelve ports can be configured as 100-Gigabit Ethernet ports. Port numbers 0 through 3, and 6 through 9 are the eight 100-Gigabit Ethernet ports.

  • When used in MP8CE:

    • Four ports out of the total twelve ports support 100-Gigabit Ethernet speed

    • Maximum aggregate port capacity across ports 0 through 5 should not exceed 240 Gbps

    • Maximum aggregate port capacity across ports 6 through 11 should not exceed 240 Gbps

  • When used in MPC9E:

    • Eight ports out of the total twelve ports support 100-Gigabit Ethernet speed

    • Maximum aggregate port capacity across ports 0 through 5 should not exceed 400 Gbps

    • Maximum aggregate port capacity across ports 6 through 11 should not exceed 400 Gbp

  • Table 1 lists the configurable Gigabit Ethernet port speeds for each port.

Software features

  • Supports rate selectability at the port level.

  • By default, the ports are configured as 10-Gigabit Ethernet ports.

  • Supports remote port identification.

  • Supports Media Access Control Security (MACsec)

Cables and connectors

Tip: You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.

The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.

LEDs

  • OK/FAIL LED, one bicolor:

    • OFF—MIC is offline or MIC has fault.

    • Red—MIC is in power failure state.

    • Green—MIC is online.

  • Link LED, one green per port:

    • Steady green—Link is up.

    • Off—Link is down or disabled.

  • Like port status LED, each individual lane LED support four states as: OFF, AMBER, GREEN, RED. See MPC and MIC Lane LED Scheme Overview for more details.

Table 1: Multi Rate Ethernet MIC Port Speed Capabilities for MIC-MACSEC-MRATE

Port #

4x10-Gigabit Ethernet

40-Gigabit Ethernet

100-Gigabit Ethernet

0

yes

yes

yes

1

yes

yes

yes

2

yes

yes

yes

3

yes

yes

yes

4

yes

yes

no

5

yes

yes

no

6

yes

yes

yes

7

yes

yes

yes

8

yes

yes

yes

9

yes

yes

yes

10

yes

yes

no

11

yes

yes

no