[an error occurred while processing this directive] [an error occurred while processing this directive]

Verifying Parts Received for the JCS 1200 Platform

A packing list is included in each shipment. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and descriptions of each part in your order.

If any part is missing, contact a Juniper Networks customer service representative.

A fully configured JCS 1200 platform contains the JCS 1200 platform chassis with installed components, listed in Table 1, and an accessory box, which contains the parts listed in Table 2. The parts shipped with your JCS 1200 platform can vary.

Table 1: Parts List for a Fully Configured JCS 1200 Platform

Component

Quantity

Chassis

1

Chassis bezel

1

Cable management collar

1

Routing Engines

12

Management modules

1

Management module interposer trays

1

Media trays

2

MUX cards

2

Switch modules

1

Switch module interposer trays

1

Power modules

4

Air filters

2

Quick Start installation instructions

1

Large mounting shelf

1

Small mounting shelf

1

Blank panels for slots without components installed

One blank panel for each slot not occupied by a component

Table 2: JCS 1200 Accessory Box Parts List

Part

Quantity

Front rack-mount bracket

2

Mid rack-mount bracket

2

Rack-mount screws M5 x12 mm

8

Serial port breakout cable, with 14 RJ-45 jacks to female DB-9, to connect the JCS 1200 platform through the serial port

1

RJ-45 CPU adapters for use with the serial port breakout cable

12

RJ-45 ETH adapters for use with the switch module

2

RJ-45 AMM adapters for use with the management module

2

Label, accessories contents, JCS 1200

1

Small rear shelf for mounting the JCS 1200 platform in a four-post rack

1

Large front shelf for mounting the JCS 1200 platform in a four-post or two-post rack

1

Bottom cable manager

1

Top cable manager

1

Cable manager screws

7

Juniper Networks Compliance Form Letter, RoHS Worldwide

1

Juniper Networks Product Warranty

1

End User License Agreement

1

Accessory box, 19" x 12" x 3"

1

[an error occurred while processing this directive]