Gigabit Ethernet Enhanced Queuing Ethernet Services DPC with SFP
Note: The routing table is limited to 32,000 IP routes. This limitation applies to any manner in which the routes are learned, such as OSPF, RIP, and so on. The DPC supports BGP for L2 VPNs only.
Syntax: ge-fpc/pic/port where:
For example, ge-1/3/0 is the interface for port 0 in the top right row of 10 ports on a DPC installed in slot 1.
Cables and connectors
Tip: You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.
The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.
You can install any transceiver supported by the DPC. For information about installing and removing transceivers, see the hardware guide for your router.
Note: Do not install Gigabit Ethernet SFPs in the SONET/SDH port. The port will not recognize the SFP.
Link LED, one green per port:
The Link LEDs are labeled in groups of five: