Tri-Rate Enhanced Ethernet Services DPC
Syntax: ge-fpc/pic/port where:
For example, ge-1/3/0 is the interface for port 0 (labeled
Cables and connectors
Tip: You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.
The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.
Caution: Do not use RJ-45 cables with strain-relief boots exceeding 1.5 mm from the bottom of the connector. Cable boots that exceed this measurement can damage the port.