10-Gigabit Ethernet DPC with XFP
Syntax: xe-fpc/pic/port where:
For example, xe-1/3/0 is the interface for the last port on a DPC installed in slot 1.
Cables and connectors
Tip: You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.
The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series.
You can install any transceiver supported by the DPC. For information about installing and removing transceivers, see the hardware guide for your router.