Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

MX960 Component LEDs on the Craft Interface

 

MX960 Host Subsystem LEDs on the Craft Interface

Each host subsystem has three LEDs, located in the middle of the craft interface, that indicate its status. The LEDs labeled RE0 show the status of the Routing Engine in slot 0 and the SCB in slot 0. The LEDs labeled RE1 show the status of the Routing Engine and SCB in slot 1. Table 1 describes the functions of the host subsystem LEDs.

Table 1: Host Subsystem LEDs on the Craft Interface

Label

Color

State

Description

MASTER

Green

On steadily

Host is functioning as the master.

ONLINE

Green

On steadily

Host is online and is functioning normally.

OFFLINE

Red

On steadily

Host is installed but the Routing Engine is offline.

Off

Host is not installed.

MX960 Power Supply LEDs on the Craft Interface

Each power supply has two LEDs on the craft interface that indicate its status. The LEDs, labeled 0 through 3, are located on the upper left of the craft interface next to the PEM label. Table 2 describes the functions of the power supply LEDs on the craft interface.

Table 2: Power Supply LEDs on the Craft Interface

Label

Color

State

Description

PEM

Green

On steadily

Power supply is functioning normally.

Red

On steadily

Power supply has failed or power input has failed.

MX960 DPC and MPC LEDs on the Craft Interface

Each DPC or MPC has LEDs on the craft interface that indicate its status. The LEDs, labeled 0 through 5, 2/6, and 7 through 11, are located along the bottom of the craft interface. Slot 2/6 is for an additional DPC, FPC, MPC, or SCB. Table 3 describes the functions of the LEDs.

Table 3: DPC and MPC LEDs on the Craft Interface

Label

Color

State

Description

OK

Green

On steadily

Card is functioning normally.

Blinking

Card is transitioning online or offline.

Off

The slot is not online.

FAIL

Red

On steadily

Card has failed.

MX960 FPC LEDs on the Craft Interface

An FPC takes up two DPC slots when installed in an MX Series router. The LEDs, labeled 0 through 5, 2/6, and 7 through 11, are located along the bottom of the craft interface. Slot 2/6 is for an additional DPC, FPC, MPC, or SCB. The LED corresponds to the lowest DPC slot number in which the FPC is installed. Table 4 describes the functions of the FPC LEDs.

Table 4: FPC LEDs on the Craft Interface

Label

Color

State

Description

OK

Green

On steadily

FPC is functioning normally.

Blinking

FPC is transitioning online or offline.

Off

The slot is not online.

FAIL

Red

On steadily

FPC has failed.

MX960 SCB LEDs on the Craft Interface

Each SCB has two LEDs on the craft interface that indicates its status. The SCB LEDs, labeled 0, 1, and 2/6, are located along the bottom of the craft interface. Table 5 describes the functions of the SCB LEDs.

Table 5: SCB LEDs on the Craft Interface

Label

Color

State

Description

OK

Green

On steadily

SCB: Fabric and control board functioning normally.

Blinking

SCB is transitioning online or offline.

Off

The slot is not online.

FAIL

Red

On steadily

SCB has failed.

MX960 Fan LEDs on the Craft Interface

The fan LEDs are located on the top left of the craft interface. Table 6 describes the functions of the fan LEDs.

Table 6: Fan LEDs on the Craft Interface

Label

Color

State

Description

FAN

Green

On steadily

Fan is functioning normally.

Red

On steadily

Fan has failed.