Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

TX Matrix LCC-CB LEDs

 

Status LEDs and port LEDs are located on the faceplate of the LCC-CB (see Figure 1).

Figure 1: LCC-CB LEDs
LCC-CB LEDs

The LEDs located in the middle of the LCC-CB indicate its status.Table 1 describes the functions of the LCC-CB LEDs.

Table 1: LCC-CB LEDs

Label

Color

State

Description

MASTER

Blue

On steadily

LCC-CB is functioning as the master.

Off

LCC-CB is functioning as the backup.

FAIL

Yellow

On steadily

LCC-CB has failed.

Off

No faults have been detected on the LCC-CB.

OK

Green

On steadily

LCC-CB is online and is functioning normally.

Blinking

LCC-CB is powering up, but not online.

Off

LCC-CB is offline.

The LEDs located next to each port indicate the port status.

Table 2: LCC-CB Port LEDs

Label

Color

State

Description

MASTER

Blue

On steadily

LCC-CB is functioning as the master.

Off

LCC-CB is functioning as the backup.

FAIL

Yellow

On steadily

LCC-CB has failed.

Off

No faults have been detected on the LCC-CB.

OK

Green

On steadily

LCC-CB is online and is functioning normally.

Blinking

LCC-CB is powering up, but not online.

Off

LCC-CB is offline.

Note

The LCC-CB ports and port LEDs are used only when the LCC-CB is installed in a line-card chassis (LCC). See T640 LCC-CB LEDs.

When the LCC-CB is installed in the TX Matrix switch-card chassis (SCC), the ports and the port LEDs labeled—ACT and LINK—are reserved for future use.

The LEDs located next to each port indicate its status.

Table 3: LCC-CB Port LEDs

Port

LED

Color

State

Description

SFC0 throughSFC4

ACT

Off

This port is not used for TX Matrix routers.

LINK

Off

This port is not used for TX Matrix routers.

TX

ACT

Off

This port is not used for TX Matrix routers.

LINK

Off

This port is not used for TX Matrix routers.

JCS

LINK

Off

This port is not used.