Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    JCS1200 Alarm Panel Module LEDs

    Figure 1 shows the location of LEDs and connectors on the alarm panel module.

    Figure 1: JCS1200 Alarm Panel Module LEDs and Connectors

    JCS1200 Alarm
Panel Module LEDs and Connectors

    Table 1 describes the function of each LED on the alarm panel.

    Table 1: JCS1200 Alarm Panel Module LEDs

    Name

    Color

    State

    Description

    Power-on

    Green

    On steadily

    Power is present in the JCS1200 platform.

    Off

    The power subsystem, the power module, or the LED has failed.

    Caution: If the power-on LED is off, it does not mean that no electrical current is present in the JCS1200 platform. The LED might be defective. To remove all electrical current from the JCS1200 platform, you must disconnect all power cords from the rear power connectors.

    Location

    Blue

    On steadily or flashing

    Indicates that the LED has been turned on by the system administrator, to aid in visually locating the JCS1200 platform. After the JCS1200 platform has been located, you can have the system administrator turn off the location LED.

    Critical system fault

    Yellow or red

    Note: The color of this LED can be set to yellow or red through the management module.

    On steadily

    The JCS1200 platform has a critical system fault. A critical system fault is an error or event that is detected by the system and that has a significant impact to the system. In this case, the system cannot continue to operate or is operating in a nonredundant power or cooling configuration.

    Major system fault

    Yellow or red

    Note: The color of this LED can be set to yellow or red through the management module.

    On steadily

    The JCS1200 platform has a major system fault. The system can continue to operate but may lose some functionality and performance.

    Minor system fault

    Yellow

    On steadily

    The JCS1200 platform has a minor system fault. The system can continue to operate, usually without noticeable loss of functionality or performance.

    FRU ready for removal

    Blue

    On steadily

    It is safe to remove the alarm panel module from the JCS1200 platform.

    Alarm panel module fault

    Yellow

    On steadily

    Indicates that there is a fault on the alarm panel module. The system can continue to operate, usually without the use of the components on the alarm panel module.

    Published: 2013-01-30