Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

ACX7100-48L Routers Hardware and CLI Terminology Mapping

 

Table 1 describes the hardware terms used in ACX7100-48L router documentation and the corresponding terms used in the Junos OS CLI.

Table 1: CLI Equivalents of Terms Used in Documentation for ACX7100-48L Routers

Hardware Item (as Displayed in the CLI)

Description (as Displayed in the CLI)

Value (as Displayed in the CLI)

Item in Documentation

Additional Information

Chassis

JNP7100-48L [ACX7100-48L]

Router chassis

Chassis Physical Specifications for ACX7100-48L Routers

Routing Engine

RE-JNP-7100

Built-in Routing Engine

FPC n

Abbreviated name of the Flexible PIC Concentrator (an FPC is equivalent to a line card)

The value of n is always 0.

The router does not have actual FPCs. In this case, FPC refers to the router itself.

Interface Naming Conventions Used in the Junos OS Operational Commands

PIC n

Abbreviated name of the PIC

The value of n is always 0.

The router does not have physical PICs.

The built-in network ports on the front panel of the router are mapped to logical PICs.

Interface Naming Conventions Used in the Junos OS Operational Commands

 

xcvr n

Abbreviated name of the transceiver

The value of n is the number of the port in which the transceiver is installed.

Optical transceivers

PSM (n)

One of the following:

  • JPSU-1600W-AC-AFO

  • JPSU-1600W-AC-AFI

  • JPSU-1600W-DC-AFO

  • JPSU-1600W-DC-AFI

n is a value in the range of 0–1. The value corresponds to the power supply slot number.

AC or DC power supply module

ACX7100-48L Power System

Fan tray (n)

One of the following:

  • JNP7100 Fan Tray, Front to Back Airflow - AFO

  • JNP7100 Fan Tray, Back to Front Airflow - AFI

n is a value in the range of 0–5. The value corresponds to the fan module slot number.

Fan module

Cooling System and Airflow in ACX7100-48L Routers