Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

2-Port 10-Gigabit Ethernet XPIM Overview

 

The 2-Port 10-Gigabit Ethernet XPIM provides a connection to high-speed Ethernet networks through branch WAN service and allows carriers to provide multiple levels of Ethernet service with a single connection option for all service ranges.

The 2-Port 10-Gigabit Ethernet XPIM can be installed only in the following slots, which provide 20G connectivity to the Services and Routing Engine (SRE) switch:

  • Slot 6 on the SRX550 Services Gateway. See Figure 1.

  • Slots 2 and 6 on the SRX650 Services Gateway. See Figure 2.

Figure 1: SRX550 Services Gateway Slot Numbers
SRX550 Services Gateway
Slot Numbers
Figure 2: SRX650 Services Gateway Slot Numbers
SRX650 Services Gateway
Slot Numbers

The 2-Port 10-Gigabit Ethernet XPIM contains two 10-Gigabit Ethernet interfaces with both copper and small form-factor pluggable plus transceiver (SFP+) terminations, to support redundancy and enable the services gateway to be used as a pure security service device. The 2-Port 10-Gigabit Ethernet XPIM also provides effective MPLS/GRE termination of customer traffic with reasonable performance.

Note

Only the SRX650 Services Gateway supports hot-swappable functionality for GPIMs. The SRX550 Services Gateway does not support hot-swappable functionality for GPIMs.

Figure 3 shows the 2-Port 10-Gigabit Ethernet XPIM.

Figure 3: 2-Port 10-Gigabit Ethernet XPIM
2-Port 10-Gigabit Ethernet XPIM