Preparing the SRX 210 Services Gateway for Wall-Mount Installation
You can mount an SRX 210 services gateway on a wall. The four rubber feet attached to the chassis provide stability.
Before mounting an SRX 210 services gateway on a wall:
- Verify that the site meets the requirements described in Site Preparation Checklist for the SRX 210 Services Gateway.
- Remove the chassis from the shipping carton. For unpacking instructions, see Unpacking the SRX 210 Services Gateway
- Verify that you have the following parts available in
your wall-mounting kit for the SRX 210 services gateway:
- Wall-mounting brackets