Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installation Overview for the SRX3600 Services Gateway

 

After you have prepared your installation site, as described in the Site Preparation Checklist for the SRX3600 Services Gateway, you are ready to unpack and install the services gateway. It is important to proceed through the installation process in the following order:

  1. Review the safety guidelines explained in SRX3600 Services Gateway Definition of Safety Warning Levels.
  2. Install the services gateway, as described in Installing the SRX3600 Services Gateway in a Rack or Cabinet Using a Mechanical Lift.
  3. Connect cables to external devices, as described in Connecting the SRX3600 Services Gateway to a Management Console or an Auxiliary Device or Connecting the SRX3600 Services Gateway to a Network for Out-of-Band Management.
  4. Connect the grounding cable, as described in Grounding the SRX3600 Services Gateway. Warning

    To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, you must properly ground the services gateway chassis before connecting power.

  5. Connect the power cables, as described in Connecting the SRX3600 Services Gateway to a DC Power Source or Connecting the SRX3600 Services Gateway to an AC Power Source.
  6. Power on the services gateway, as described in Powering On the SRX3600 Services Gateway.
  7. Perform the initial system startup, as described in Performing Initial Software Configuration on the SRX3600 Services Gateway.