Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

SRX240 Services Gateway LEDs

 

This topic includes the following sections:

Front Panel LEDs

Figure 1 shows the SRX240 Services Gateway front panel LEDs.

Figure 1: SRX240 Services Gateway Front Panel LEDs
SRX240 Services Gateway
Front Panel LEDs

Table 1 lists the LED indicators on the SRX240 Services Gateway front panel.

Table 1: SRX240 Services Gateway Front Panel Components

Component

Description

Usage

Status LED

The Status LED has the following indicator colors:

  • Green and steadily on indicates that the device is functioning normally.

  • Amber and steadily on indicates that the device is starting up.

  • Red and steadily on indicates that the device has failed.

The Status LED can be used to determine whether the device is starting up, is functioning normally, or has failed.

Alarm LED

The Alarm LED has the following indicator colors:

  • Red and steadily on indicates a major alarm.

  • Amber and steadily on indicates a minor alarm.

  • Off indicates that the device is starting up.

Note: When the system is up and running, if the Alarm LED is off, it indicates that no alarms are present on the device.

The Alarm LED can be used to gather information on major or minor alarms or to determine whether the device is functioning normally.

Power LED

The Power LED has the following indicator colors:

  • Green and steadily on indicates that the device is functioning normally.

  • Amber and steadily on indicates that the Power button has been pressed and quickly released.

  • Off indicates that the device is not receiving power.

The Power LED can be used to determine whether the device is receiving power.

HA LED

The HA LED has the following indicator colors:

  • Green and steadily on indicates that all HA links are available.

  • Red and steadily on indicates that the HA links are not working as expected.

  • Amber and steadily on indicates that some HA links are not working as expected.

  • Off indicates that HA is not enabled.

The HA LED can be used to determine whether the chassis clustering is enabled on the device.

Mini-PIM LED

Each Mini-Physical Interface Module (Mini-PIM) LED has the following indicator colors:

  • Green and steadily on indicates that the Mini-PIM is functioning normally.

  • Off indicates that the Mini-PIM is not present or not detected by the device.

The Mini-PIM LED can be used to determine whether the Mini-PIM is present and detected by the device.

Ethernet Port LEDs

On the SRX240 Services Gateway, each Gigabit Ethernet port has the two LEDs as shown in Figure 2.

Figure 2: SRX240 Services Gateway Port LEDs
SRX240 Services Gateway Port
LEDs

Table 2: SRX240 Services Gateway Port LEDs

Number

LED

1

TX/RX/Link LED

2

PoE (Power over Ethernet) LED

Note

The PoE LED is enabled only on the PoE variant of the SRX240 Services Gateway. For non-PoE services gateways, the PoE LED remains off.

Table 3 describes the Ethernet port LEDs.

Table 3: SRX240 Services Gateway Ethernet Port LEDs

Function

Color

State

Description

TX/RX/Link

Green

Blinking

Link is active. Data communication is taking place.

Steady

Link is active. No data communication is taking place.

Unlit

Off

Link is inactive.

PoE Status

Green

Steady

PoE is activated and the connected power device is receiving power.

Yellow

Steady

PoE is activated, but the connected power device is not receiving power (fault or not enough power).

Unlit

Off

PoE is disabled or no device is drawing power.

DC Power Supply Feed LEDs (SRX240 Services Gateway DC Power Supply Model)

On the SRX240 Services Gateway with DC power supply models, the back panel includes two LEDs, which indicate the status of the DC power supply feed.

Figure 3 shows the DC power supply feed LEDs on the SRX240 Services Gateway with DC power supply model.

Figure 3: DC Power Supply Feed LEDs
DC Power Supply
Feed LEDs

Table 4 describes the DC power supply feed LEDs.

Table 4: DC Power Supply Feed LEDs

DC Input

DC Output

LED A

LED B

Input A

Input B

Input is normal.

Input is normal.

No output1.

Red

Red

Output is normal.

Green

Green

Input is connected but has failed because the power supply fuse has failed or input voltage is low.

Input is normal.

Output is normal.

Red (blinking)

Green

Input is normal.

Input is connected but has failed because the power supply fuse has failed or input voltage is low.

Output is normal.

Green

Red (blinking)

Input breaker open or no DC input connected.

Input is normal.

Output is normal.

Red (blinking)

Green

Input has failed.

Input has failed.

No output.

Red (blinking)

Red (blinking)

No input.

No input.

No output.

Off

Off

(1) No output because of output side failure or an open connection.