SRX240 Services Gateway Hardware Features
Table 1 lists the hardware features supported on various models of the SRX240 Services Gateway.
Table 1: SRX240 Services Gateway Hardware Features
Features | SRX240 Services Gateway with AC Power Supply and No PoE Support | SRX240 Services Gateway with AC Power Supply and PoE Support | SRX240 Services Gateway with DC Power Supply |
---|---|---|---|
DDR memory |
|
|
|
PoE support | No | Yes | No |
Power supply rating | 150 watts | 360 watts | 190 watts |
Input voltage | 100 to 240 VAC | 100 to 240 VAC | –48 VDC Operating range: -40.5 V to -72 V |
Gigabit Ethernet ports | 16 | 16 | 16 |
Console ports | 1 | 1 | 1 |
Universal Serial Bus (USB) ports | 2 | 2 | 2 |
Mini-PIM slots | 4 | 4 | 4 |
LEDs | Status, Alarm, HA, Power, Mini-PIMs, and Port (TX/RX/Link and PoE) | Status, Alarm, HA, Power, Mini-PIMs, and Port (TX/RX/Link and PoE) | Status, Alarm, HA, Power, Mini-PIMs, Port (TX/RX/Link and PoE), DC power feed LEDs. |
Note: The PoE LED is enabled only on the PoE variant of the SRX240 Services Gateway. | |||
Internal flash |
|
|
|
Fans | 6 | 6 | 6 |
Air filters | One (Separately orderable) | None | One |
NEBS-compliant | No | No | Yes |
An air filter is not shipped with the SRX240 Services Gateway with AC power supply models. To meet NEBS requirements, you must order the air filter separately and install it. Contact your Juniper Networks customer service representative for more information.
For more details about the chassis specification, see SRX240 Services Gateway Chassis.