Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

SRX1500 Services Gateway Installation Overview

 

After you have prepared the site for installation and unpacked the SRX1500 Services Gateway, you are ready to install the device. It is important to proceed through the installation process in the following order:

  1. Review the safety guidelines explained in General Electrical Safety Guidelines and Warnings.
  2. Prepare the services gateway for installation as described in Preparing the SRX1500 Services Gateway for Rack-Mount Installation.
  3. Install the services gateway as described in Installing the SRX1500 Services Gateway in a Rack.
  4. Connect cables to external devices as described in Connecting the SRX1500 Services Gateway to a Network for Out-of-Band Management and Connecting the SRX1500 Services Gateway to a Management Console.
  5. Connect the grounding cable as described in Connecting the SRX1500 Services Gateway Grounding Cable.
  6. Power on the services gateway as described in Powering On the SRX1500 Services Gateway.