Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installation Overview for the SRX1400 Services Gateway

 

This section provides instructions for installing the SRX1400 Services Gateway in a rack or cabinet. Because of the size and weight of the device—up to 42.5 lb (19.3 kg) (fully loaded chassis) depending on the configuration—we recommend that you install it using a mechanical lift. The SRX1400 Services Gateway is rack-mountable with support for both front-mounting and rear-mounting.

After you have prepared your installation site, you are ready to unpack and install the services gateway. It is important to proceed through the installation process as shown in Table 1.

Table 1: SRX1400 Services Gateway Installation Process

Procedures

For More Information, See:

Review the safety guidelines

Site Preparation Checklist for the SRX1400 Services Gateway

Install the services gateway

Installing the SRX1400 Services Gateway in a Rack or Cabinet Manually

or

Installing the SRX1400 Services Gateway in a Rack or Cabinet Using a Mechanical Lift

Connect cables to external devices

Connecting the SRX1400 Services Gateway to a Network for Out-of-Band Management

or

Connecting the SRX1400 Services Gateway to a Management Console or an Auxiliary Device

Connect the grounding cable

Grounding the SRX1400 Services Gateway

Connect the power cables

Connecting the SRX1400 Services Gateway to a DC Power Supply

or

Connecting the SRX1400 Services Gateway to an AC Power Supply

Power on the services gateway

Powering On the SRX1400 Services Gateway

Perform the initial system startup

SRX1400 Services Gateway Software Configuration Overview