SRX100 Services Gateway Basic Connectivity Overview
The JUNOS Software is preinstalled on the services gateway.
When the device is powered on, it is ready to be configured.
If you are setting up a services gateway for the first
time, you can use either J-Web configuration editor or CLI configuration
editor to configure basic connectivity.
If you are setting up many services gateways, autoinstallation
can help automate the configuration process.
Before you configure the services gateway for
the first time, you should complete the prerequisite tasks shown in Table 1:
Table 1: Services Gateway Prerequisite
Tasks
Task
|
Details
|
Gather the information on:
|
- Device identification
- Hostname for the device on the network
- Domain that the device belongs to on the network
- Password for the root user
- Time zone information
- System time and zone for services gateway location
- IP address of a Network Time Protocol (NTP) server, if
NTP is used to set the time on the services gateway
- Network settings for the services gateway:
- IP address of a DNS server
- List of domains that can be appended to hostnames for
DNS resolution
- IP address of the default gateway
- IP address to be used for the loopback interface
- IP address of the built-in Ethernet port that you will
use for management purposes. For example, use the fe-0/0/0 interface
|
If you are performing the initial configuration with
the J-Web interface, gather the following equipment:
|
- Management device, such as a laptop, with an Ethernet
port
- Ethernet cable (provided)
|
If you are performing the initial configuration with
the CLI, gather the following equipment:
|
- Management device, such as a PC or laptop, with a serial
port and an asynchronous terminal application (such as Microsoft Windows
HyperTerminal)
- Ethernet cable (provided)
- For a remote connection, gather the following equipment:
- Two dial-up modems
- An adapter appropriate for your modem (not provided)
|
Published: 2009-08-19