Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation


    Operating and Positioning the MX240 SCB Ejectors

    • When removing or inserting an SCB, ensure that the SCBs or blank panels in adjacent slots are fully inserted to avoid hitting them with the ejector handles. The ejector handles require that all adjacent components be completely inserted so the ejector handles do not hit them, which could result in damage.
    • The ejector handles rotate. After you install the SCBs in the router, ensure that the ejectors are positioned horizontally and do not block any other components or the LEDs. To avoid blocking the visibility of the LEDs, position the ejectors over the PARK icon.
    • To insert or remove the SCB, slide the ejector across the SCB horizontally, rotate it, and slide it again another quarter of a turn. Turn the ejector again and repeat as necessary. Utilize the indexing feature to maximize leverage and to avoid hitting any adjacent components.
    • Operate both ejector handles simultaneously. The insertion force on an SCB is too great for one ejector.

    Related Documentation


    Published: 2014-03-25