Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

TX Matrix Plus Power Distribution

 

Most sites distribute DC power through a main conduit that leads to frame-mounted DC power distribution panels, one of which might be located at the top of the rack that houses the TX Matrix Plus router. A pair of cables (one input and one return) connects each set of terminal studs to the power distribution panel.

Figure 1 shows a typical DC source cabling arrangement.

Figure 1: Typical DC Source Cabling to the TX Matrix Plus Router
Typical DC Source Cabling to the TX Matrix Plus Router
Note

All inputs on the DC power supply in slot PEM0 must be powered by dedicated power feeds derived from feed A, and all inputs on the DC power supply in slot PEM1 must be powered by dedicated power feeds derived from feed B. This configuration provides the commonly deployed A/B feed redundancy for the system.

Warning

For field-wiring connections, use copper conductors only.

Related Documentation