Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    MX2020 Three-Phase Delta AC Power Distribution Module Description

    Each three-phase delta AC PDM weighs approximately 12 lb (5.44 kg). A metal wiring compartment contains two AC terminal blocks and ground labeled GND. One AC terminal block consists of three input terminals that serves six PSMs and the second terminal block serves three PSMs. The terminal block on the left is labeled A1, B1, and C1 (bottom to top). The second terminal block on the right is labeled A2, B2, and C2 (bottom to top). The PDMs are located at the rear of the chassis in slots PDM0/Input0 through PDM3/Input1, (bottom to top). LEDs provide the status of the PDM. Figure 1 shows the three-phase delta AC PDM.

    Note: The three-phase delta AC PDM terminal blocks will be flipped depending on which slot the PDM gets plugged into.

    Figure 1: Three-Phase Delta AC Power Distribution Module

    Three-Phase
Delta AC Power Distribution Module

    Figure 2 shows the three-phase delta AC PDM connections.

    Note: The three-phase delta AC PDM must be installed and secured in the chassis before connecting the power input cables. If the PDM must be removed, both input power cables must be uninstalled and removed from the PDM before the PDM can be removed from the chassis. The MX2020 chassis is not sensitive to phase rotation sequence—either CW or CCW will operate correctly.

    Figure 2: Three-Phase Delta AC Power Distribution Module Connections

    Three-Phase Delta
AC Power Distribution Module Connections

    Figure 3 shows the three-phase delta AC power cord.

    Figure 3: Three-Phase Delta AC Power Cord

    Three-Phase
Delta AC Power Cord

    Modified: 2016-03-29