Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

MX2010 Cable Manager Description

 

The MX2010 router supports the following cable managers:

Standard Cable Manager

The standard cable manager consists of the following components:

  • Card-cage cable manager and air filter—MX2000-CBL-MID

  • Lower cable manager—MX2000-CBL-BTM-S

  • DC power cable manager—MX2010-DC-CBL-MGR-S

The lower cable manager (see Figure 1) is located just below the bottom line-card cage, has a removable cover that is secured by two captive screws with access to rows used for routing and securing the cables away from the front of the Modular Port Concentrators (MPCs), and Modular Interface Cards (MICs) (see Figure 2).

You can use cable strips or other ties to gently secure the cables in the lower cable manager. To secure the cables in place, loop the tie through the cable anchor and secure the tie.

Each DC PDM has one cable manager. The DC cable manager routes cables away from the rear of the PDMs, (see Figure 1).

You can use cable strips or other ties to gently secure the cables in the DC cable manager. To secure the cables in place, loop the tie through the cable anchor and secure the tie. You can pull the DC cable manager up and outward to lock it into the maintenance position.

Figure 1: MX2010 Standard Cable Managers
MX2010 Standard Cable Managers
Figure 2: Lower Cable Manager
Lower Cable Manager

The card-cage cable manager (see Figure 3 and Figure 4) is a combination cable tray and air filter located in the upper card cage, which has rows for routing and securing the cables away from the front of the CB-REs, and SFBs.

You can use cable strips or other ties to gently secure the cables in the card-cage cable manager. To secure the cables in place, loop the tie through the cable anchor and secure the tie. To access the air filter, the cable manager needs to be opened.

Figure 3: Card-Cage Cable Manager
Card-Cage Cable Manager
Figure 4: Card-Cage Air Filter
Card-Cage Air Filter

Extended Cable Manager

The extended cable manager consists of the following components:

  • Extended lower cable manager—MX2000-CBL-BTM-XT-S

  • Extended DC cable manager—MX2020-DC-CBL-MGR-XT-S

Figure 5: MX2010 Extended Cable Manager
MX2010 Extended Cable
Manager

The extended cable manager provides additional support to route and secure a large number of cables away from the front of the MPCs and MICs (see Figure 6).

Figure 6: MX2010 Lower Extended Cable Manager
MX2010
Lower Extended Cable Manager

The extended DC cable manager provides additional support to route and secure a large number of cables away from the rear of the PDMs.

You can use cable strips or other ties to gently secure the cables in the upper and lower extended cable managers. To secure the cables in place, loop the tie through the cable anchor and secure the tie.