Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Eligible Slots for SRX1400, SRX3400, and SRX3600 Services Gateway Modules

 

Table 1 summarizes the slots in which you can install each module type for SRX1400, SRX3400, and SRX3600 Services Gateways.

Table 1: Supported Slots for SRX1400, SRX3400, and SRX3600 Services Gateway Modules

Module Name and Number

Supported Slots

SRX1400

SRX3400

SRX3600

Services Processing Card SRX3K-SPC-1-10-40

Front slot labeled 1 (When installed as primary SPC in conjunction with an SRX3K-NPC in slot 3)

Front slot labeled 2 (When installed as second SPC)

Front slots labeled 1-4 and rear slots labeled 5-7. We recommend that you install SPCs in rear panel slots to leave room for IOCs in the front panel slots.

See note below for additional restrictions.

Front slots labeled 1-6 and rear slots labeled 7-12. We recommend that you install SPCs in rear panel slots to leave room for IOCs in the front panel slots.

See note below for additional restrictions.

Network Processing Card SRX3K-NPC

Slot 3 (When installed as the primary NPC in conjunction with an SRX3K-SPC in slot 1)

Rear slots labeled 5-7.

Rear slots labeled 10-12

I/O Card SRX3K-16GE-TX

Slot 2

Front slots labeled 1-4, except as noted below.

Front slots labeled 1-6, except as noted below.

I/O Card SRX3K-16GE-SFP

I/O Card SRX3K-2XGE-XFP

Network Processing I/O Card SRX1K3K-NP-2XGE-SFPP

Slot 2

Front slots labeled 1-4 and rear slots labeled 5-7. We recommend that you install IOCs in front panel slots to simplify cable management.

Front slots labeled 1-6 and rear slots labeled 7-12. We recommend that you install IOCs in front panel slots to simplify cable management.

Routing Engines SRX3K-RE-12-10 and SRX1K-RE-12-10

Front slot labeled RE (SRX1K-RE-12-10 only)

Rear slot labeled RE0. (SRX3K-RE-12-10 only)

SRX Clustering Module SRX3K-CRM

Not Applicable

Rear slot labeled RE1.

Note
  • For the SRX3400 and SRX3600 Services Gateways to meet NEBS and ETSI standards, they must not have any two SPCs installed side by side in the CFM slots in the front of the chassis (CFM slots 1 through 4 in the SRX3400, CFM Slots 1 through 6 in the SRX3600). You can install SPCs side by side in the CFM slots in the rear of the chassis (CFM slots 5 through 7 in the SRX3400, CFM slots 7 through 12 in the SRX3600).

  • When an SRX3400 or SRX3600 Services Gateway is in the Express Path (formerly known as Services Offload) mode supported in Junos OS release 12.1X44-D10 and later, IOCs are only supported in front panel slots 1 through 3. See the Junos OS documentation for more information about Express Path mode.