Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

SRX220 Services Gateway LEDs

 

This topic includes the following sections:

Front Panel LEDs

Figure 1 shows the SRX220 Services Gateway front panel LEDs.

Table 1 lists the LED indicators on the SRX220 Services Gateway front panel.

Figure 1: SRX220 Services Gateway Front Panel LEDs
SRX220 Services Gateway Front
Panel LEDs

Table 1: SRX220 Services Gateway Front Panel Component LEDs

Component

Description

Usage

Alarm LED

The Alarm LED has the following indicator colors:

  • Red indicates a major alarm.

  • Amber indicates a minor alarm.

  • Off indicates that the device is starting up.

    Note: When the system is up and running, if the Alarm LED is off, it indicates that no alarms are present on the device.

The Alarm LED shows major or minor alarms and whether the device is functioning normally.

Status LED

The Status LED has the following indicator colors:

  • Green indicates that the device is functioning normally.

  • Amber indicates that the device is starting up.

  • Red indicates that the device has failed.

The Status LED shows whether the device is starting up, is functioning normally, or has failed.

MPIM-1 and MPIM-2 LEDs

The MPIM-1 and MPIM-2 LEDs have the following indicator colors:

  • Green indicates that the Mini-PIM in the corresponding slot is functioning normally.

  • Off indicates that there is no Mini-PIM in the corresponding slot, or that the Mini-PIM is not detected by the device.

  • Red indicates that the Mini-PIM hardware has failed or that its anti-counterfeit check failed.

The MPIM-1 and MPIM-2 LEDs show that the Mini-PIMs are present and detected by the device.

Power LED

The Power LED has the following indicator colors:

  • Green indicates that the device is functioning normally.

  • Amber indicates that the Power button has been pressed and quickly released. The device is gracefully shutting down.

  • Off indicates that the device is not receiving power.

The Power LED shows whether the device is receiving power.

HA LED

The HA LED has the following indicator colors:

  • Green indicates that all HA links are available.

  • Red indicates that the HA links are not working as expected.

  • Amber indicates that some HA links are not working as expected.

  • Off indicates that chassis clustering is not enabled.

The HA LED shows whether high availability is enabled on the device.

Ethernet Port LEDs

On the SRX220 Services Gateway, each Gigabit Ethernet port has two LEDs. Figure 2 shows the SRX220 Services Gateway Ethernet port LEDs.

Figure 2: SRX220 Services Gateway Ethernet Port LEDs
SRX220 Services Gateway Ethernet
Port LEDs
Note

The numbers in Figure 2 correspond to the numbers in Table 2.

Table 2 describes the built-in Ethernet port LEDs.

Table 2: SRX220 Services Gateway Built-In Ethernet Port LEDs

Number

Function

Color

State

Description

1

TX/RX/LINK LED

Green

Blinking

Link is active. Data communication is taking place.

On steadily

Link is active. No data communication is taking place.

Unlit

Off

Link is inactive.

2

PoE LED

Green

On steadily

Power over Ethernet (PoE) is on and the connected power device is receiving power.

Yellow

On steadily

PoE is on, but the connected power device is not receiving power (device fault or not enough power).

Unlit

Off

PoE is off.

Note

The PoE LED is enabled only on the Power over Ethernet (PoE) model of the SRX220 Services Gateway (SRX220H2-POE).For the non-PoE SRX220H2 model, the PoE LED remains off.