Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    SRX3000 Series Services Gateway Cards Supported on SRX1400 Services Gateway

    You can install either an NSPC, or a combination of SRX3000 Series Services Gateway Network Processing Card (NPC) and Services Processing Card (SPC), on the SRX1400 Services Gateway. You must use a double-wide tray with the combination of NPC and SPC.

    To install the NPC and SPC on the SRX1400 Services Gateway, you must order the double-wide tray (SRX1K3K-2CFM-TRAY) to hold two single-wide CFMs (NPC and SPC). Contact your Juniper Networks customer service representative for more information.

    The Network Processing Cards (NPCs), Service Processing Cards (SPCs), and I/O Cards (IOCs) are completely interoperable between SRX1400 Services Gateway and SRX3000 Series Services Gateway, and they have the same part numbers.

    Table 1 lists the hardware components that are interoperable on the SRX3000 Series Services Gateways and the SRX1400 Services Gateways.

    Table 1: SRX3000 Series Services Gateway Cards Supported on SRX1400 Services Gateway

    Card

    Model Number

    Slot on SRX1400 Services Gateway

    NPC

    SRX3K-NPC

    CFM 3

    SPC

    SRX3K-SPC

    CFM 1

    16-Port Copper Ethernet/Fast Ethernet/Gigabit Ethernet IOC

    SRX3K-16GE-TX

    CFM 2

    16-Port SFP Gigabit Ethernet IOC

    SRX3K-16GE-SFP

    CFM 2

    2-Port XFP 10-Gigabit Ethernet IOC

    SRX3K-2XGE-XFP

    CFM 2

    Note: The Routing Engine and power supply units (AC and DC) are not interoperable between the SRX1400 Services Gateway and the SRX3000 and SRX5000 Series Services Gateways.

    Note: The NPCs, SPCs, and IOCs are not provided with the SRX1400 Services Gateway. You must order them separately. Contact your Juniper Networks customer service representative for more information.

    Published: 2011-10-19