Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Hardware Component Locations in the SRX3600 Services Gateway Chassis

 

The SRX3600 Services Gateway is populated with one SFB, one Routing Engine, two power supplies, and a fan tray at the factory. You must install all other cards required to meet your configuration needs. Table 1 lists the possible locations of the various hardware components in the SRX3600 Services Gateway. Figure 1 and Figure 2 show the locations of the slots and the applicable modules.

Table 1: Allowed Slot Locations for the SRX3600 Services Gateway Components

Module Name

Allowed Slot Locations

SFB

Front slot labeled 0.

Routing Engine

Rear slot labeled RE0.

SCM

Rear slot labeled RE1.

IOCs

Front slots labeled 1-6.

NP-IOCs

Front slots labeled 1-6 and rear slots labeled 7-12. We recommend that you install NP-IOCs in front panel slots to simplify cable management.

NPCs

Rear slots labeled 10-12.

SPCs

Front slots labeled 1-6 and rear slots labeled 7-12. We recommend that you install SPCs in rear panel slots to leave room for IOCs in the front panel slots.

Power supplies

Rear slots (four) at top of chassis.

Fan tray and air filter

Rear, vertical slot on far right of chassis.

Figure 1: Front Slots on the SRX3600 Services Gateway
Front Slots on the SRX3600
Services Gateway
Figure 2: Rear Slots on the SRX3600 Services Gateway
Rear Slots on the SRX3600 Services
Gateway
Note

A minimum configuration must include one SPC and either one NPC or one NP-IOC. However, if there are no NPCs in the chassis, the Ethernet ports in the SFB will not be functional. SeeSRX3600 Services Gateway NPCs andSRX3600 Services Gateway SPCs for details about these cards.