Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

SRX110 Services Gateway Front Panel and Back Panel Views with 3G and Integrated VDSL2

 

This topic includes the following sections:

SRX110 Services Gateway Front Panel View with 3G and Integrated VDSL2

Figure 1 and Figure 2 show the front panels of the SRX110 Services Gateway models SRX110H-VA and SRX110H-VB.

Figure 1: SRX110 Services Gateway Front Panel (SRX110H-VA)
SRX110 Services Gateway
Front Panel (SRX110H-VA)
Figure 2: SRX110 Services Gateway Front Panel (SRX110H-VB)
SRX110 Services Gateway
Front Panel (SRX110H-VB)

Table 1 lists the front panel components of the SRX110 Services Gateway.

Table 1: SRX110 Services Gateway Front Panel Components

Number

Component

1

Power button

2

LEDs: Alarm, Status, Power, and 3G

3

Universal Serial Bus (USB) port

4

Fast Ethernet ports

5

Console port

6

Reset Config button

7

LEDs: SYNC and TX/RX

8

  • For SRX110H-VA—VDSL/ADSL-POTS

  • For SRX110H-VB—VDSL/ADSL-ISDN

For more information on the front panel components, see the following topics:

SRX110 Services Gateway Back Panel View

Figure 3 shows the back panel of the SRX110 Services Gateway.

Figure 3: SRX110 Services Gateway Back Panel
SRX110 Services Gateway
Back Panel

Table 2 lists the back panel components of the SRX110 Services Gateway.

Table 2: SRX110 Services Gateway Back Panel Components

Number

Component

1

Cable tie holder

2

3G-WAN USB port

3

Lock

4

Grounding point

5

CompactFlash card

6

Power supply unit

7

Cable tie holder

Note
  • If there is any problem with the CompactFlash card, you must return the services gateway for repair or replacement. For this, you need to contact Juniper Networks Technical Assistance Center (JTAC).

  • The cable tie holder provides support for holding the power cord to the power supply point.

  • The lock allows you to lock and secure the device to the installation site.