Configuring a BGP Export Policy Condition (NSM Procedure)

You can define a routing policy condition based on the existence of routes in specific tables for use in a BGP export policy.

To configure condition in NSM:

  1. In the navigation tree, select Device Manager > Devices.
  2. In the Devices list, double-click the device to select it.
  3. Click the Configuration tab.
  4. In the configuration tree, expand Policy Options.
  5. Select Condition.
  6. Add or modify the parameters as specified in Table 33.
  7. Click one:
    • OK—To save the changes.
    • Cancel—To cancel the modifications.
    • Apply — To apply the protocol settings.

Note: After you make changes to a device configuration, you must push that updated device configuration to the physical security device for those changes to take effect. You can update multiple devices at one time. See the Updating Devices section in the Network and Security Manager Administration Guide for more information.

Table 33: Condition Configuration Details

Option

Function

Your Action

Name

Specifies the name of the condition.

Enter a name.

Comment

Specifies the comment for the condition.

Enter a comment.

Route Active On

Enables you to specify the policy condition based on the existing routes and the corresponding route tables.

  1. Select Route Active On.
  2. Select one:
    • None—No policy condition based on routes need to be specified.
    • if-route-exists—Specify the policy condition based on the routes. Enter the comment, route and the corresponding routing table.
  3. Click OK.