Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Monitoring Hosts Using the J-Web Ping Host Tool

 

Purpose

Note

This topic applies only to the J-Web Application package.

Use the J-Web ping host tool to verify that the host can be reached over the network. The output is useful for diagnosing host and network connectivity problems. The switch sends a series of ICMP echo (ping) requests to a specified host and receives ICMP echo responses.

Action

To use the J-Web ping host tool:

  1. Select Troubleshoot>Ping Host.
  2. Next to Advanced options, click the expand icon.
  3. Enter information into the Ping Host page, as described in Table 89.

    The Remote Host field is the only required field.

  4. Click Start.

    The results of the ping operation are displayed in the main pane . If no options are specified, each ping response is in the following format:

    bytes bytes from ip-address: icmp_seq=number ttl=number time=time
  5. To stop the ping operation before it is complete, click OK.

Meaning

Table 89 lists the fields.



Table 89: J-Web Ping Host Field Summary

FieldFunctionYour Action

Remote Host

Identifies the host to ping.

Type the hostname or IP address of the host to ping.

Advanced Options

Don't Resolve Addresses

Determines whether to display hostnames of the hops along the path.

  • To suppress the display of the hop hostnames, select the check box.

  • To display the hop hostnames, clear the check box.

Interface

Specifies the interface on which the ping requests are sent.

Select the interface on which ping requests are sent from the list. If you select any, the ping requests are sent on all interfaces.

Count

Specifies the number of ping requests to send.

Select the number of ping requests to send from the list.

Don't Fragment

Specifies the Don't Fragment (DF) bit in the IP header of the ping request packet.

  • To set the DF bit, select the check box.

  • To clear the DF bit, clear the check box.

Record Route

Sets the record route option in the IP header of the ping request packet. The path of the ping request packet is recorded within the packet and displayed in the main pane.

  • To record and display the path of the packet, select the check box.

  • To suppress the recording and display of the path of the packet, clear the check box.

Type-of-Service

Specifies the type-of-service (TOS) value in the IP header of the ping request packet.

Select the decimal value of the TOS field from the list.

Routing Instance

Name of the routing instance for the ping attempt.

Select the routing instance name from the list.

Interval

Specifies the interval, in seconds, between transmissions of individual ping requests.

Select the interval from the list.

Packet Size

Specifies the size of the ping request packet.

Type the size, in bytes, of the packet. The size can be from 0 through 65468. The switch adds 8 bytes of ICMP header to the size.

Source Address

Specifies the source address of the ping request packet.

Type the source IP address.

Time-to-Live

Specifies the time-to-live (TTL) hop count for the ping request packet.

Select the TTL value from the list.

Bypass Routing

Determines whether ping requests are routed by means of the routing table.

If the routing table is not used, ping requests are sent only to hosts on the interface specified in the Interface box. If the host is not on that interface, ping responses are not sent.

  • To bypass the routing table and send the ping requests to hosts on the specified interface only, select the check box.

  • To route the ping requests using the routing table, clear the check box.