Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
[+] Expand All
[-] Collapse All

Related Documentation

Defining CoS Code-Point Aliases (J-Web Procedure)

Note: This topic applies only to the J-Web Application package.

J-Web Application package Release 14.1X53-A2 does not support Class of Service (CoS) on EX4600 switches.

You can use the J-Web interface to define CoS code-point aliases on an EX Series switch. By defining aliases, you can assign meaningful names to a particular set of bit values and refer to them when configuring CoS components.

To define CoS code-point aliases:

  1. Select Configure > Class of Service > CoS Value Aliases.

    Note: After you make changes to the configuration on this page, you must commit the changes immediately for them to take effect. To commit all changes to the active configuration, select Commit Options > Commit. See Using the Commit Options to Commit Configuration Changes (J-Web Procedure) for details about all commit options.

  2. Click one of the following options:
    • Add—Adds a code-point alias. Enter information into the code point alias page as described in Table 31.
    • Edit—Modifies an existing code-point alias. Enter information into the code point alias page as described in Table 31.
    • Delete—Deletes an existing code-point alias.

Table 31 describes the related fields.

Table 31: CoS Value Aliases Configuration Fields



Your Action

Code point name

Specifies the name for a code-point—for example, af11 or be.

Enter a name.

Code point type

Specifies a code-point type. The code-point type can be DSCP or IP precedence.

Select a value.

Code point value bits

Specifies the CoS value for which an alias is defined.

Changing this value alters the behavior of all classifiers that refer to this alias.

To specify a CoS value, type it in the appropriate format:

  • For DSCP CoS values, use the format xxxxxx, where x is 1 or 0—for example, 101110.
  • For IP precedence CoS values, use the format xxx, where x is 1 or 0—for example, 111.

Related Documentation

Modified: 2017-03-05