Installing the Fan Tray on the SRX650 Services Gateway

To install the fan tray, perform the following steps:

  1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. For more information about ESD, see Preventing Electrostatic Discharge Damage to the SRX650 Services Gateway.
  2. Grasp the fan tray handle and insert it straight into the chassis. Note the correct orientation by the this side up label on the top surface of the fan tray. See Figure 16.
  3. Use a number 2 Phillips screwdriver to tighten the center screw on the fan tray faceplate to secure it to the chassis.

Figure 16: Installing the Fan Tray

Installing the Fan Tray

Related Documentation