Installing the SRX650 Services Gateway in a Rack

You can front-mount the SRX650 Services Gateway in a rack. The mounting brackets are an optional accessory. Many types of racks are acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame racks.

Note: If you are installing multiple devices in one rack, install the lowest one first and proceed upward in the rack.

To install the services gateway in a rack:

1. Position a mounting bracket on each side of the chassis.
2. Use a number 2 Phillips screwdriver to install the screws that secure the mounting brackets to the chassis.
3. Have one person grasp the sides of the services gateway, lift it, and position it in the rack.
4. Align the bottom hole in each mounting bracket with a hole in each rack rail, making sure the chassis is level.
5. Have a second person install a mounting screw into each of the two aligned holes. Use a number 2 Phillips screwdriver to tighten the screws.
6. Install the second screw in each mounting bracket.
7. Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and that the services gateway is level.

Related Documentation

• Installation Overview for the SRX650 Services Gateway
• SRX650 Services Gateway Rack Size and Strength Requirements
• SRX650 Services Gateway Spacing of Mounting Bracket and Flange Holes