Unpacking the SRX650 Services Gateway

The SRX650 Services Gateway is shipped in a cardboard carton and secured with foam packing material. The carton also contains an accessory box and quick start instructions.

Note: The services gateway is maximally protected inside the cardboard carton. Do not unpack it until you are ready to begin installation.

To unpack the SRX650 Services Gateway:

  1. Move the cardboard carton to a staging area as close to the installation site as possible, where you have enough room to remove the components from the chassis.
  2. Position the cardboard carton with the arrows pointing up.
  3. Carefully open the top of the cardboard carton.
  4. Remove the foam covering the top of the services gateway.
  5. Remove the accessory box.
  6. Verify the parts received against the lists in Verifying Parts Received with the SRX650 Services Gateway.
  7. Store the brackets and bolts inside the accessory box.
  8. Save the shipping carton and packing materials in case you need to move or ship the services gateway at a later time.

Related Documentation