Maintaining Port Modules on the SRX5800 Services Gateway

Purpose

For optimum services gateway performance, verify the condition of the port modules installed in Flex IOCs.

Action

On a regular basis:

Check the LEDs on port modules faceplates. The meaning of the LED states differs for various port modules. If the Flex IOC that houses the port modules detects a port modules failure, the Flex IOC generates an alarm message to be sent to the Routing Engine.

Issue the CLI show chassis fpc pic-status command. The port modules slots in an FPC are numbered from 0 through 1, top to bottom:

user@host> show chassis fpc pic-status

Slot 0   Online       SRX5k SPC
  PIC 0  Online       SPU Cp-Flow
  PIC 1  Online       SPU Flow
Slot 3   Online       SRX5k DPC 4X 10GE
  PIC 0  Online       1x 10GE(LAN/WAN) RichQ
  PIC 1  Online       1x 10GE(LAN/WAN) RichQ
  PIC 2  Online       1x 10GE(LAN/WAN) RichQ
  PIC 3  Online       1x 10GE(LAN/WAN) RichQ
Slot 5   Online       SRX5k FIOC
  PIC 0  Online       16x 1GE TX
  PIC 1  Online       4x 10GE XFP

For further description of the output from the command, see the Junos OS System Basics and Services Command Reference.

Maintaining Port Modules on the SRX5800 Services Gateway

Purpose

Action

Related Documentation