SRX5800 Services Gateway Chassis

The services gateway chassis is a rigid sheet metal structure that houses all the other services gateway components (see Figure 1, Figure 2, and Figure 3). The chassis measures 27.75 in. (70.49 cm) high, 17.37 in. (44.11 cm) wide, and 23.0 in. (58.42 cm) deep (from the front-mounting flanges to the rear of the chassis). The chassis installs in standard 800-mm (or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame racks. Up to three services gateways can be installed in one standard (48-U) rack if the rack can handle their combined weight, which can be greater than 1,134 lb (515 kg). See SRX5800 Services Gateway Physical Specifications for physical specifications for the SRX5800 Services Gateway.

Mounting hardware includes front-mounting flanges on the front of the chassis, and two center-mounting brackets attached to the center of the chassis.

Caution: Before removing or installing components of a services gateway, attach an ESD strap to an ESD point and place the other end of the strap around your bare wrist. Failure to use an ESD strap can result in damage to the services gateway.

Warning: The services gateway must be connected to earth ground during normal operation.

Figure 1: Front View of a Fully Configured Services Gateway Chassis

Figure 2: Rear View of a Fully Configured AC-Powered Services Gateway Chassis

Figure 3: Rear View of a Fully Configured DC-Powered Services Gateway Chassis

SRX5800 Services Gateway Chassis

Related Documentation