RJ-45 Connector Pinouts for the SRX5800 Services Gateway Routing Engine Ethernet Port

The port on the Routing Engine labeled ETHERNET is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the Routing Engine to a management LAN (or other device that supports out-of-band management). Table 47 describes the RJ-45 connector pinout.

Table 47: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port

Pin

Signal

1

TX+

2

TX–

3

RX+

4

Termination network

5

Termination network

6

RX–

7

Termination network

8

Termination network

Related Documentation