Connecting the SRX5800 Services Gateway to a Network for Out-of-Band Management

To connect the Services Gateway Routing Engine to a network for out-of-band management, connect an Ethernet cable with RJ-45 connectors to the ETHERNET port on the Routing Engine. One Ethernet cable is provided with the services gateway. To connect to the ETHERNET port on the Routing Engine:

  1. Turn off the power to the management device.
  2. Plug one end of the Ethernet cable (Figure 44 shows the connector) into the ETHERNET port on the Routing Engine. Figure 43 shows the port.
  3. Plug the other end of the cable into the network device.

Figure 43: Ethernet Port

 Ethernet Port

Figure 44: Routing Engine Ethernet Cable Connector

Routing Engine Ethernet
Cable Connector

Related Documentation