•  SRX5800 Services Gateway Getting Started Guide
  •  About This Guide
  •   Step 1: Prepare the Site for SRX5800 Services Gateway Installation
    •  Rack-Mounting Requirements
    •  Tools Required to Unpack and Prepare the SRX5800 Services Gateway for Installation
  •   Step 2: Install the Mounting Hardware
    •  Install the Mounting Hardware in a Four-Post Rack or Cabinet
    •  Install the Mounting Hardware in an Open-Frame Rack
  •   Step 3: Install the Services Gateway
    •  Remove Components
    •  Install the Services Gateway
    •  Reinstall Components
  •  Step 4: Connect the Grounding Cable
  •   Step 5: Connect External Devices and IOC Cables
    •  Connect to a Network for Out-of-Band Management
    •  Connect a Management Console
    •  Connect the IOC Cables
  •   Step 6: Connect Power Cables
    •  Connect Power to an AC-Powered Services Gateway
    •  Connect Power to a DC-Powered Services Gateway
  •   Step 7: Perform the Initial Software Configuration
    •  Enter Configuration Mode
    •  Configure User Accounts and Passwords
    •  Configure System Attributes
    •  Commit the Configuration
  •  Safety Warnings
  •   SRX5800 Services Gateway Compliance Statements for EMC Requirements
    •  Canada
    •  European Community
    •  Japan
    •  United States
  •  SRX Series Documentation and Release Notes
  •  Requesting Technical Support
  •  Revision History

No index entries found.