Index
Symbols
- #, comments in configuration statements
- ( ), in syntax descriptions
- < >, in syntax descriptions
- [ ], in configuration statements
- { }, in configuration statements
- | (pipe), in syntax descriptions
A
- AC plug types
- AC power cables
- specifications
- AC power supply
- cord, See AC power cord
- description
- electrical specifications
- high-capacity
- description
- electrical specifications
- installing
- removing 1, 2
- upgrading
- AC power supply cord
- connecting
- disconnecting
- specifications
- AC specifications
- circuit breaker
- electrical
- accessory box
- parts list
- removing
- accident procedures, electrical
- agency approvals
- air filter
- installing
- maintaining
- removing
- routine inspection of
- airflow
- required clearance around chassis for
- alarms
- cutoff/lamp test button
- LEDs (red and yellow) on craft interface
- messages, list of
- relay contacts
- connecting wire
- disconnecting wire
- wire specifications
- temperature, displaying
- altitude, acceptable range
- antistatic mat, using
- attenuation in fiber-optic cable
- AUX port, See auxiliary port on Routing Engine
- auxiliary port (for Routing Engine management)
- cable
- connection during initial installation
- connector pinouts (DB-9)
- replacement instructions
- specifications 1, 2
- auxiliary port on Routing Engine
- description
B
- battery-handling warning
- booting the services gateway 1, 2
- braces, in configuration statements
- brackets
- angle, in syntax descriptions
- square, in configuration statements
C
- cable
- auxiliary or console port (for Routing Engine management)
- connecting during initial installation
- replacing
- cover
- installation
- DPC
- connecting during maintenance 1, 2
- Ethernet port (for Routing Engine management)
- connecting during initial installation
- replacing
- fiber-optic
- attenuation
- cleaning instructions for transceivers
- dispersion
- multimode and single-mode
- transmission distance, maximum
- wavelength ranges
- grounding, See DC power and grounding cables
- IOC
- disconnecting
- maintaining
- port module
- disconnecting
- power, See AC power cord
- cable management system
- description
- fiber-optic cable, use with
- cable manager
- installing
- reinstalling
- after chassis installation
- removing
- before chassis installation
- chassis
- alarm messages, See alarm, messages
- dimensions
- ESD points
- grounding points 1, 2
- installing in rack
- weight
- checklist for site preparation
- chromatic dispersion in fiber-optic cable
- class 1 laser warning
- class 1 LED warning
- cleaning instructions
- fiber-optic transceivers
- clearance, around rack
- CLI
- as troubleshooting tool
- command
- to display chassis alarm messages
- to display IOC status 1, 2
- to display port module status
- to display serial number
- cold-swap-only components, description
- commands
- ping
- show chassis alarms
- show chassis fpc
- for IOC status 1, 2
- show chassis fpc pic-status
- show chassis hardware
- show chassis IOC pic-status
- traceroute
- comments, in configuration statements
- compatibility, electromagnetic
- compliance statements for EMC requirements
- Canada
- European Community
- Japan
- United States
- components
- cable management system
- chassis
- cooling system
- craft interface
- field replacement
- Flex IOC
- host subsystem
- IOC
- midplane
- port module
- power supplies
- redundancy
- Routing Engine
- SCB
- SPC
- components, packing for shipment
- connecting
- AC power supply cord
- DC power supply cable
- CONSOLE port, See console port on Routing Engine
- console port (for Routing Engine management)
- cable
- connection during initial installation
- connector pinout (RJ-45) 1, 2
- replacement instructions
- specifications 1, 2
- console port on Routing Engine
- description
- conventions
- notice icons
- text and syntax
- cooling system
- description
- troubleshooting
- craft interface
- alarm cutoff/lamp test button
- alarm relay contacts
- description
- host subsystem LEDs
- installing
- IOC and SPC LEDs
- LEDs
- alarm (red and yellow)
- online buttons
- power supply LEDs
- removing
- routine inspection of
- curly braces, in configuration statements
- customer support, contacting
D
- DC power
- source cabling
- DC power circuit breaker
- DC power supply
- cables, See DC power supply cable, specifications
- description
- electrical specifications
- installing
- removing 1, 2
- DC power supply cable
- connecting
- disconnecting
- lugs
- specifications
- DC specifications
- electrical 1, 2
- disconnecting
- AC power supply cord
- DC power supply cable
- dispersion in fiber-optic cable
- DPC
- cable
- installation instructions
E
- earthquakes
- tested toleration for seismic
- EIA rack standards
- electrical
- accident procedures
- safety guidelines and warnings
- electrical specifications 1, 2, 3, 4
- electricity
- site wiring guidelines
- electromagnetic
- compatibility, See EMC
- pulse
- electrostatic
- bag, using to store components
- EMC (EMI)
- suppression
- EMC requirements
- Canada
- European Community
- Japan
- United States
- EMP
- environmental specifications
- ESD
- preventing damage to components by
- Ethernet port (for Routing Engine management)
- cable
- connection during initial installation
- replacement instructions
- specifications
- Ethernet port on Routing Engine
- description
- ETSI rack standards
F
- fan tray
- installing
- maintaining
- reinstalling
- after chassis installation
- removing
- before chassis installation
- troubleshooting
- fan trays
- description
- field-replaceable units
- listed
- fire safety requirements
- Flex I/O Card, See Flex IOC
- Flex IOC
- removing
- font conventions
G
- grounding (electrical) specifications
- AC-powered services gateway
- DC-powered services gateway
- grounding cables
- lug
- guidelines, electrical safety
H
- hardware components
- power requirements 1, 2
- higher-order mode loss (HOL)
- host subsystem
- description
- LEDs
- hot-pluggable components, description
- hot-removable and hot-insertable components, description
- humidity (relative), acceptable
I
- I/O Card, See IOC
- installation
- AC power, connecting
- instructions warning
- parts received, verifying
- unpacking the services gateway
- installation instructions
- alarm relay contact wires
- tools required
- cable, auxiliary or console port (for Routing Engine management)
- for maintenance or replacement
- tools required
- cable, DPC
- for maintenance or replacement
- cable, Ethernet port (for Routing Engine management)
- for maintenance or replacement
- tools required
- cable, PIC
- for maintenance or replacement
- DC power and grounding cables
- tools required
- installing
- AC power supply
- air filter
- alarm relay contact wires
- during initial installation
- for maintenance or replacement 1, 2
- cable manager
- cable, auxiliary or console port (for Routing Engine management)
- during initial installation
- cable, Ethernet port (for Routing Engine management)
- during initial installation
- chassis
- tools required
- craft interface
- DC power supply
- DC power, connecting
- fan tray
- IOC
- IOC, connecting
- PIC, connecting
- power and grounding cables
- tools required
- Installing
- SPC
- instructions
- calculation
- power requirements
- cleaning, See cleaning instructions
- maintenance
- IOC
- port module
- interference
- electromagnetic
- radio frequency
- IOC
- cable
- removal instructions
- connecting
- holding
- installing
- LEDs
- maintaining
- maintenance
- removing
- status, checking 1, 2, 3
- storing
- IOCs
- components
- troubleshooting
J
- jewelry removal warning
- JTAC
- Juniper Networks Technical Assistance Center (JTAC)
- Juniper Technical Assistance Center, See JTAC
L
- laser beam warning
- laser safety guidelines
- LEDs
- AC power supplies
- alarm (red and yellow on craft interface)
- description
- DC power supplies
- host subsystem
- IOC
- on components
- on craft interface
- power supplies
- SCB
- lightning activity warning
- link loss, calculating
- lugs for DC power and grounding cables
- lugs for DC power cables
M
- maintaining
- air filter
- fan tray
- IOC 1, 2
- maintenance guidelines
- IOC 1, 2
- IOC cable
- port module
- management
- port, See Ethernet port on Routing Engine
- midplane
- description
- functions
- modal dispersion in fiber-optic cable
- mode loss, higher-order
- multimode fiber-optic cable, See cable, fiber-optic
N
- notice icons
O
- online buttons
- craft interface
- operating temperature warning
- overview
- services gateway
P
- packing services gateway
- components for shipment
- parentheses, in syntax descriptions
- PEMs, See power supplies
- physical specifications
- PIC
- cable
- installation instructions
- connecting
- SONET/SDH
- power budget calculation
- ping command
- pinouts
- RJ-45 cable connector ports (auxiliary/console)
- RJ-45 Ethernet cable connector port
- plug types
- AC
- port
- auxiliary on Routing Engine, See auxiliary port on Routing Engine
- console on Routing Engine, See console port on Routing Engine
- Ethernet on Routing Engine, See Ethernet port on Routing Engine
- port module
- components
- maintenance
- status, checking
- Port module
- cable
- removal instructions
- troubleshooting
- power
- budget calculation
- cables and cords, See AC power cord; DC power cables
- margin calculation
- requirements for hardware components 1, 2
- surges
- power supplies
- AC electrical specifications
- cables, See DC power
- DC electrical specifications
- description
- LEDs 1, 2, 3
- power supply
- reinstalling
- after chassis installation
- removing
- before chassis installation
- power system
- AC electrical specifications
- DC electrical specifications
- troubleshooting
- powering off the services gateway
- powering on the services gateway 1, 2
- product disposal warning
Q
- qualified personnel warning
R
- rack
- clearance around, required
- mounting bracket hole spacing
- size and strength required
- standards, EIA and ETSI
- rack mounting
- shelves
- rack requirements
- mounting
- radiation from open port apertures warning
- radio frequency interference, preventing
- redundancy
- reinstalling
- cable manager
- after chassis installation
- fan tray
- after chassis installation
- power supply
- after chassis installation
- SCB
- after chassis installation
- relative humidity, acceptable
- removal instructions
- cable
- auxiliary or console port (for Routing Engine management)
- Ethernet port (for Routing Engine management) 1, 2
- IOC
- port module
- removing
- AC power supply 1, 2
- air filter
- alarm relay contact wires
- cable manager
- before chassis installation
- craft interface
- DC power supply 1, 2
- fan tray
- before chassis installation
- IOC
- power supply
- before chassis installation
- SCB
- before chassis installation
- SFP
- XFP
- Removing
- SPC
- repair policies
- restricted access area warning
- return materials authorization
- return procedure
- RFI
- RJ-45 cable connector pinouts
- RJ-45 cable connector pinouts (auxiliary and console ports)
- RMA, See return materials authorization
- Routing Engine
- boot sequence
- components
- description
- for dual chassis cluster control link
- management ports
- cable and wire specifications
- ports
- status indicator lights
- USB port
S
- safety guidelines, laser
- safety requirements
- fire
- fire suppression equipment
- SCB
- reinstalling
- after chassis installation
- removing
- before chassis installation
- SCBs
- components
- description
- LEDs
- seismic (earthquake)
- serial number
- in output from show chassis hardware command
- services gateway
- parts list
- physical specifications
- returning
- unpacking
- weight
- Services Processing Card, See SPC
- Services Processing Unit, See SPU
- SFP
- description
- installing
- removing
- shipment
- packing the components
- shipping container
- unpacking
- weight
- show chassis alarms command 1, 2, 3
- show chassis fpc command
- for IOC status
- show chassis fpc pic-status command 1, 2
- show chassis hardware command
- show chassis IOC command
- show chassis IOC detail command
- show chassis SPC command
- show chassis SPC detail command
- signal dispersion
- signaling, distance limitations
- single-mode fiber-optic cable, See cable, fiber-optic
- site
- electrical wiring specifications
- environmental specifications
- preparation
- checklist
- routine inspection
- SPC
- installing
- removing
- status, checking
- SPCs
- troubleshooting
- specifications
- AC power cord
- cable
- power
- Routing Engine management ports 1, 2
- clearance around rack
- DC power supply cable
- electrical
- cable and wiring
- environmental
- power
- drawn by hardware components 1, 2
- power system 1, 2
- rack
- front-mount flange hole spacing
- mounting bracket hole spacing
- size and strength
- thermal output
- wires to external alarm-reporting devices
- SPU
- startup, system
- monitoring 1, 2
- support, requesting from JTAC 1, 2
- surge protection
- Switch Control Boards, See SCBs
- syntax conventions
T
- temperature, acceptable range
- thermal output
- tolerances
- environmental
- tools required
- chassis
- returning for repair or replacement
- hardware components
- returning for repair or replacement
- maintaining
- replacement
- traceroute command
- transmission distances, fiber-optic cable
- troubleshooting
- CLI commands
- cooling system
- fans 1, 2
- IOC
- port module
- power system
- SPC
U
- U (rack unit)
- unpacking the services gateway
W
- warning
- battery-handling
- class 1 laser
- class 1 LED
- electrical safety guidelines
- installation instructions
- jewelry removal
- laser beam
- lightning activity
- operating temperature
- product disposal
- rack-mount requirements
- radiation from open apertures
- wavelength ranges supported by fiber-optic cable
- wiring, electrical, See electricity
X
- XFP
- description
- installing
- removing
Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
