Replacing the Management Ethernet Cable on the SRX5600 Services Gateway

One Ethernet cable with RJ-45 connectors is provided with the services gateway. To replace the cable connected to the ETHERNET port:

  1. Attach an ESD grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
  2. Press the tab on the connector and pull the connector straight out of the port. Figure 51 shows the connector.
  3. Disconnect the cable from the network device.
  4. Plug one end of the replacement cable into the ETHERNET port. Figure 52 shows the port.
  5. Plug the other end of the cable into the network device.

Figure 51: Cable Connector

Image g003781.gif

Figure 52: Ethernet Port

Image g004034.gif

Related Documentation