Connecting the SRX5600 Services Gateway to a Network for Out-of-Band Management

To connect the services gateway Routing Engine to a network for out-of-band management, connect an Ethernet cable with RJ-45 connectors to the ETHERNET port on the Routing Engine. One Ethernet cable is provided with the services gateway. To connect to the ETHERNET port on the Routing Engine:

  1. Turn off the power to the management device.
  2. Plug one end of the Ethernet cable (Figure 28 shows the connector) into the ETHERNET port on the Routing Engine. Figure 27 shows the port.
  3. Plug the other end of the cable into the network device.

Figure 27: Ethernet Port

Image g004034.gif

Figure 28: Routing Engine Ethernet Cable Connector

Image g001063.gif

Related Documentation