SRX550 Services Gateway Front Panel LEDs

Figure 4 shows the locations of the SRX550 Services Gateway front panel LEDs. Table 6 describes the LEDs.

Figure 4: SRX550 Services Gateway Front Panel LED Locations

SRX550 Services Gateway Front
Panel LED Locations

Table 6: SRX550 Services Gateway Front Panel LEDs

LED Label

LED State

LED Color

Description

ALARM

On Steadily

Amber

Indicates a major alarm, such as low Services Processing Unit (SPU) memory (less than 10% remaining), session full, maximum number of VPN tunnels reached, high availability (HA) status changed, or redundant group member not found.

Red

Indicates a critical alarm, such as a failure of a hardware component or software module, or detection of a firewall attack.

Off

Unlit

indicates that the device is starting up.

Note: When the system is up and running, if the ALARM LED is off, it indicates that no alarms are active on the device.

STATUS

On Steadily

Green

The services gateway is functioning normally.

Amber

The services gateway is starting up, running diagnostics, or shutting down.

Red

The services gateway has failed.

Off

Unlit

The services gateway is powered off.

POWER

Steadily on

Green

The services gateway is functioning normally and that the services gateway and all power supply units (PSUs) are receiving power.

Red

At least one PSU has failed.

Amber

The Power button has been pressed and that the services gateway is shutting down gracefully.

Off

Unlit

The services gateway is not receiving power.

HA

Steadily on

Green

All configured high availability links are available.

Red

High availability links are not working as expected and a cluster member might be missing or unreachable.

Amber

Some configured high availability links are down, but enough links are still active for full high availability functionality. In this situation, performance might be reduced, current bandwidth could cause packet drops, or a single point of failure might now exist.

Off

Unlit

High availability is not enabled.

MPIM-1, MPIM-2

On Steadily

Green

The Mini-PIM in the corresponding slot is functioning normally.

Red

The Mini-PIM hardware in the corresponding slot has failed or its anti-counterfeit check failed.

Off

Unlit

There is no Mini-PIM in the corresponding slot, or that the Mini-PIM is not detected by the device.

RPS

On Steadily

Green

The redundant power supply is operating normally

Red

One of the following conditions has occurred:

  • The primary power supply has failed, and the device is being powered by the redundant power supply.
  • The redundant power supply has been installed, but is not connected to a power source.

Off

Unlit

The redundant power supply is not installed.

ACE

Note: The ACE LED is not functional.

STORAGE

Blinking

Green

The services gateway is transferring data to or from the optional storage device.

On Steadily

Green

The optional storage device is installed but no data is being transferred to or from it.

Off

Unlit

The optional storage device is not installed.

Related Documentation