RJ-45 Connector Pinouts for the SRX550 Services Gateway Ethernet Port
The port on the front panel labeled ETHERNET is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the services gateway to a management LAN (or other device that supports out-of-band management). Table 39 describes the RJ-45 connector pinouts for the Ethernet port.
Table 39: RJ-45 Connector Pinouts for Services Gateway Ethernet Port
Pin | Signal |
---|---|
1 | TX+ |
2 | TX- |
3 | RX+ |
4 | Termination network |
5 | Termination network |
6 | RX- |
7 | Termination network |
8 | Termination network |